Page 80 - TURNING CATALOG p121-254
P. 80
ISOTURN INSERTS 90° 45º 45°
45º
SCMT-SM 75º
Square Inserts with a 7°
Positive Flank for Semi-Finishing IC=L D1
and Finish Turning on Soft RE
Materials and Exotic Alloys 7°
S
Dimensions Tough 1 Hard Recommended
Machining Data
Designation L S RE D1 IC830 ap f
IC6025
IC8250 (mm) (mm/rev)
IC8150 0.50-3.00 0.07-0.25
IC5005 0.50-3.00 0.10-0.30
IC807 0.50-3.50 0.10-0.25
IC907 1.00-4.00 0.10-0.30
SCMT 09T304-SM 9.52 3.97 0.40 4.40 •• ••
•••••••
SCMT 09T308-SM 9.52 3.97 0.80 4.40 •
SCMT 120404-SM 12.70 4.76 0.40 5.50 •• ••
SCMT 120408-SM 12.70 4.76 0.80 5.50
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: SSBCR/L (70) • SSSCR/L (70)
SCMT-14 90° 45º 75º 45°
Square Inserts with a 7° IC=L 45º
Positive Flank for Semi-Finishing RE
and Finish Turning on Soft D1
Materials and Exotic Alloys
7°
S
Dimensions Tough 1 Hard Recommended Machining Data
Designation L S RE D1 IC8250 ap f
4.40 IC807 (mm)
5.50 IC907 1.00-3.50 (mm/rev)
1.00-4.00 0.12-0.30
SCMT 09T304-14 9.52 3.97 0.40 •• 0.12-0.30
•
SCMT 120404-14 12.70 4.76 0.40
D1
• For user guide and cutting speed recommendations, see pages 122-134, 236-248 7°
For tools, see pages: SSBCR/L (70) • SSSCR/L (70)
S
SCMT-19 90° 45º 75º
Square Inserts with a 7° Positive IC=L Tough 1 Hard 45º 45°
Flank for Semi-Roughing at RE
Medium to High Feeds
Dimensions Recommended Machining Data
IC830 ap fz
IC20
Designation LS RE D1 IC5005 (mm) (mm/rev)
IC807
IC907
SCMT 120408-19 12.70 4.76 0.80 5.50 ••••• 3.00-8.00 0.08-0.15
SCMT 120412-19 12.70 4.76 •
1.20 5.50 3.00-8.00 0.08-0.15
• For cutting speed recommendations, see pages
For tools, see pages: SSBCR/L (70) • SSSCR/L (70)
XOMT-DT IC RE 88º
Inserts for DR Drills S
and Boring Bars Dimensions Tough 1 Hard
IC S IC28
2.56 IC328
IC250
IC350
IC908
IC520M
Designation RE
XOMT 060204-DT 6.16 0.40 • • • • • •
• Two cutting edges • For hard materials and interrupted cut
For tools, see pages: A-SXFOR-DR (120) • A-SXFOR/L (119)
200 ISCAR