Page 81 - TURNING CATALOG p121-254

60° IC830 91º 91º 91º
IC8250 95º
TCMT-F3P IC8150L
Triangular Inserts with a Positive IC807 Recommended Machining Data
Flank for Semi-Finishing and D1
Finish Turning on Steel ISOTURN INSERTS

RE 7°
IC S

Dimensions Tough 1 Hard

ap f

Designation L S RE D1 •••• (mm) (mm/rev)
0.03-0.14
TCMT 090202-F3P 9.60 2.38 0.20 2.50 •••• 0.06-1.70 0.05-0.20
0.03-0.14
TCMT 090204-F3P 9.60 2.38 0.40 2.50 •••• 0.10-1.70 0.05-0.20
0.07-0.28
TCMT 110202-F3P 11.00 2.38 0.20 2.80 •••• 0.06-1.70 0.05-0.20

TCMT 110204-F3P 11.00 2.38 0.40 2.80 •••• 0.10-1.70

TCMT 110208-F3P 11.00 2.38 0.80 2.80 •••• 0.13-1.70

TCMT 16T304-F3P 16.50 3.97 0.40 4.40 0.10-1.70

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: E-STFCR-HEAD (115) • S-MTLCR/L-W (114) • S-STFCR/L (115) • S-STLCR/L (115) • STFCR/L (70) • STGCR/L (70)

TCMT-M3M 60° 91º 91º 95º
Triangular Positive Flank 91º
Inserts, for Machining Stainless L D1
and Low Carbon Steel IC 7° Recommended
Machining Data
RE S

Dimensions Tough 1 Hard

Designation L IC S RE D1 IC6025 ap f
IC6015
IC807 (mm) (mm/rev)
0.40-2.50 0.07-0.23
TCMT 110204-M3M 11.00 6.35 2.38 0.40 2.80 • • • 0.80-2.50 0.10-0.25
2.80 • • • 0.40-3.00 0.07-0.25
TCMT 110208-M3M 11.00 6.35 2.38 0.80 4.40 • • • 0.80-3.00 0.10-0.30

TCMT 16T304-M3M 16.50 9.52 3.97 0.40 4.40 • • •

TCMT 16T308-M3M 16.50 9.52 3.97 0.80

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: E-STFCR-HEAD (115) • S-MTLCR/L-W (114) • S-STFCR/L (115) • S-STLCR/L (115) • STFCR/L (70) • STGCR/L (70)

60° 91º 91º 95º
91º
TCMT-PF L
Triangular Inserts with a Positive
Flank for Semi-Finishing D1
and Finishing on Soft
Materials and Exotic Alloys RE 7°
IC S

Dimensions Tough 1 Hard Recommended Machining Data

Designation L IC S RE D1 IC807 ap f
IC907 (mm) (mm/rev)
0.20-3.00 0.05-0.25
TCMT 110202-PF 11.00 6.35 2.38 0.20 2.85 • •

• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: E-STFCR-HEAD (115) • S-STFCR/L (115) • S-STLCR/L (115) • STFCR/L (70) • STGCR/L (70)

201