Page 119 - TURNING CATALOG p255-458

LH OAL TOOLS FOR MINIATURE PARTS
HF
GEHSR CWN-CWX H OAH
External Machining Holders WB
for Swiss-Type and WF
Automatic Machines CDX B
Left-hand shown

Designation H CWN(1) CWX(2) CDX(3) HF B OAL WF WB LH OAH
24.0 SR 16-236 P
GEHSR 20-2 20.0 2.20 3.20 6.80 20.0 20.0 120.00 19.10 1.80 20.0 T-15/3

• For user guide, see pages 419-428, 432-436

(1) Minimum cutting width

(2) Maximum cutting width

(3) Cutting depth maximum

For inserts, see pages: GEMI (341) • GEMI (full radius) (341) • GEPI (342) • GEPI (full radius) (342) • GEPI-MT (648) • GEPI-WT (642)

PHSR/L LH OAL
External Machining Holders CUTDIA
for Swiss-Type and
Automatic Machines HF h3 HBH H
WB
WF CWX-CWX
CDX B

Left-hand shown

Designation CWN(1) CWX(2) CUTDIA(3) H HF B OAL WF h3 LH HBH WB
8.0 18.0 2.0 1.90 SR 16-236 P T-15/3
PHSR/L 10-2.4 2.40 3.18 20.0 10.0 10.0 10.0 150.00 9.00 7.0 20.0 - 1.90 SR 16-236 P T-15/3
PHSR/L 12-2.4 8.0 24.1 - 1.90 SR 16-236 P T-15/3
PHSR/L 16-2.4 2.40 3.18 25.0 12.0 12.0 12.0 150.00 11.10
CDX
2.40 3.18 32.0 16.0 16.0 16.0 150.00 15.10

• CDX=Max depth capacity, see chart below • For user guide, see pages 419-428, 432-436
(1) Minimum cutting width
(2) Maximum cutting width
(3) Limited by part diameter
For inserts, see pages: GDMW 2.4 (306)

Grooving Depth CW>2.1 CDX
Grooving Depth CDX per
Diameter for Width > 2.1 mm

D

Tmax 5.0 4.5 4.0 3.5 3.0 2.5 2.3 2.0 1.7

D 10.5 10.8 11.5 12.6 14.5 17 20 25 34

Tmax is also limited by insert

GHSR/L OAL=LF H
External Grooving and Turning LH CUTDIA WB
Holders for Swiss-Type and
Automatic Machines HF B
HBH
Left-hand shown
WF
CWN-CWX

Designation CWN(1) CWX(2) CUTDIA(3) H HF B OAL WF LH HBH WB

GHSR/L 10-2 2.20 3.15 20.0 10.0 10.0 10.0 120.00 9.10 18.0 2.0 1.80 SR 16-236 P T-15/3
GHSR/L 12-2 2.20 3.15 25.0 12.0 12.0 12.0 120.00 11.10 20.0 2.0 1.80 SR 16-236 P T-15/3
2.20 3.15 26.0 14.0 14.0 14.0 120.00 13.10 20.0 - 1.80 SR 16-236 P T-15/3
GHSR/L 14-2 2.20 3.15 32.0 16.0 16.0 16.0 120.00 15.10 26.0 - 1.80 SR 16-212 T-20/3
GHSR/L 16-2

• For user guide, see pages 419-428, 432-436
(1) Minimum cutting width
(2) Maximum cutting width
(3) For CW>2.1 mm: grooving depth depends on part diameter
For inserts, see pages: GIG (296) • GIM-J (522) • GIM-J-RA/LA (522) • GIMY (288) • GIMY (full radius) (290) • GIMY-F (291) • GIP (297) • GIP (full radius W<M) (295)
• GIP (full radius) (296) • GIP-E (293) • GIP-E (full radius) (294) • GIPA (full radius W=3-6) (301) • GIPA (W=3-6) (300) • GIPM-A46 / GIP-1250 (375) • GIPY (300)
• GITM (299) • GITM (full radius) (299) • TIP-MT (647) • TIP-P-BSPT (674) • TIP-P-BSW (668) • TIP-P-ISO (658) • TIP-P-NPT (671) • TIP-P-UN (664) • TIP-WT (641)

Grooving Depth W>2.1 T T
Grooving Depth Tmax per D
Diameter for Width > 2.1 mm

Tmax 5.0 4.5 4.0 3.5 3.0 2.5 2.3 2.0 1.7
D
10.5 10.8 11.5 12.6 14.5 17 20 25 34

Tmax is also limited by insert 373