Page 118 - TURNING CATALOG p255-458

TOOLS FOR MINIATURE PARTSSCIR/L-41-NP 4 41 9° HF Workpiece
IC1008Grooving, Turning and8.5Tc
Parting Inserts Tc CW 7° CDX
Dimensions
CDX RE x 2

Recommended Machining Data

ap f turn f groove

Designation CW CWTOL(1) RE RETOL(2) HF(3) CDX Tc • (mm) (mm/rev) (mm/rev)

SCIR/L 41-150NP08 1.50 0.020 0.08 0.020 0.2 8.00 11.0 • 0.10-1.80 0.02-0.10 0.02-0.07

SCIR/L 41-200NP08 2.00 0.020 0.08 0.020 0.2 8.00 11.0 0.10-2.50 0.02-0.15 0.02-0.09
• 0.10-3.00 0.02-0.17 0.02-0.11
SCIR/L 41-250NP08 2.50 0.020 0.08 0.020 0.2 10.00 11.0 • 0.10-4.00 0.02-0.20 0.02-0.12

SCIR/L 41-300NP08 3.00 0.020 0.08 0.020 0.2 10.00 11.0

• When turning to the opposite side of chipformer, maximum D.O.C. is 0.5 mm

(1) Cutting width tolerance (+/-)

(2) Corner radius tolerance (+/-)

(3) Cutting edge below center

For tools, see pages: SCHR/L-41BF (369)

GEHSR/L-SL LH OAL H
External Machining Tools OAH H F1 HBH WB
with Side Clamping HBKW
Mechanism for Swiss-Type CWN-CWX B
and Automatic Machines WF

CDX Left-hand shown

Designation H CWN(1) CWX(2) CDX(3) B OAL WF HBH HBKW WB LH F1 OAH
18.0 8.0 15.0
GEHSR/L 10-2-SL 10.0 2.20 3.20 6.80 10.0 120.00 9.10 2.0 2.00 1.80 18.0 8.0 17.0
GEHSR/L 12-2-SL - 1.80 18.0 8.0 21.0
12.0 2.20 3.20 6.80 12.0 120.00 11.10 - - 1.80
GEHSR/L 16-2-SL
16.0 2.20 3.20 6.80 16.0 120.00 15.10 -

• For user guide, see pages 419-428, 432-436

(1) Minimum cutting width

(2) Maximum cutting width

(3) Cutting depth maximum

For inserts, see pages: GEMI (341) • GEMI (full radius) (341) • GEPI (342) • GEPI (full radius) (342) • GEPI-MT (648) • GEPI-WT (642)

Sealing Screw Clamping Pin
SR M5x3.5PL PIN-22435
(Key: HW 2.5/5) Screw
SR M5-24145
(Key: HW 2.5/5)

Insert

Spare Parts PIN-22435 INJ SR M5-24145 HW 2.5/5 SR M5X3.5PL

Designation
GEHSR/L-SL

372 ISCAR