Page 35 - TURNING CATALOG p255-458
P. 35
GDMY ±0.1IC830 30 Ref.
Utility Double-Ended Inserts IC8250
for Grooving and Turning CDX IC8087°6.4
IC908
DAXN IC20CW
IC5010RE
IC428BW
Dimensions GROOVE-TURNTough 1 HardRecommended
Machining Data
f turn f groove
ap (mm/ (mm/
Designation CW RE CWTOL(1) RETOL(2) BW DAXN(3) CDX(4) (mm) rev) rev)
GDMY 808 8.00 0.80 0.05 0.050 6.00 50.0 27.00 • • • • • • • 1.00-4.80 0.32-0.56 0.18-0.34
• DMIN for internal machining = 65 mm • For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Minimum axial grooving diameter
(4) Cutting depth maximum
For tools, see pages: C#-GHDR/L (274) • CGHN-8-10D (287) • GADR/L-8 (286) • GADR/L-JHP (287) • GAFG-R/L-8 (580) • GHDR/L (long pocket) (285)
• GHDR/L-JHP (long pocket) (285) • GHFG-R/L-8 (579) • GHFGR/L-8 (579) • GHIR/L (W=7.0-8.3) (355)
±0.1
GIMN 7°
Utility Single-Ended Inserts 15.3 Ref.
for Grooving and Turning
Ductile Materials CW
RE
BW
Dimensions Tough 1 Hard Recommended Machining Data
IC908 ap f turn f groove
IC907
Designation CW RE CWTOL(1) RETOL(2) BW (mm) (mm/rev) (mm/rev)
0.04-0.09
GIMN 302 3.00 0.20 0.05 0.050 2.40 • 0.30-1.20 0.07-0.11 0.05-0.14
GIMN 406 0.06-0.18
4.00 0.60 0.05 0.050 3.40 • 0.75-1.60 0.11-0.18 0.07-0.22
GIMN 508
GIMN 608 5.00 0.80 0.05 0.050 4.10 • • 1.00-2.00 0.15-0.25
6.00 0.80 0.05 0.050 5.00 • 1.00-2.40 0.18-0.30
• DMIN for internal applications = 70 mm • For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: Anti-Vibration Blades (284) • C#-GHDR/L (274) • CGHN 26-M (356) • CGHN 32-DGM (358) • CGHN 32-M (357)
• CGHN-D (283) • CGHN-DG (283) • CGHN-S (282) • CGPAD (281) • CGPAD-JHP (282) • GHDR/L (short pocket) (275) • GHDR/L-JHP (short pocket) (276)
• GHDR/L-JHP-MC (short pocket) (277) • GHGR/L (278) • GHMPR/L (273) • GHMR/L (273)
GDMN ±0.1 30 Ref.
Utility Double-Ended Inserts
for Grooving and Turning 7° 6.4
Ductile Materials BW
CW
RE
Dimensions Tough 1 Hard Recommended Machining Data
IC830 ap f turn f groove
IC8250 (mm/rev)
Designation CW RE CWTOL(1) RETOL(2) CDX(3) BW IC808 (mm) (mm/rev) 0.10-0.30
GDMN 808 IC907
8.00 0.80 0.05 0.050 27.00 6.00 • • • • 1.00-3.20 0.20-0.35
• DMIN for internal machining = 65 mm • For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: C#-GHDR/L (274) • CGHN-8-10D (287) • GADR/L-8 (286) • GADR/L-JHP (287) • GAFG-R/L-8 (580) • GHDR/L (long pocket) (285)
• GHDR/L-JHP (long pocket) (285) • GHFG-R/L-8 (579) • GHFGR/L-8 (579) • GHIR/L (W=7.0-8.3) (355)
289
