Page 37 - TURNING CATALOG p255-458
P. 37
±0.1 IC830 30 Ref.
IC8250
GDMY (full radius) CDX 7° IC808 6.4
Utility Double-Ended Full Radius IC908
Inserts for Grooving and Profiling IC20
IC5010
DAXN CW IC428
RE IC806
BW
GROOVE-TURN
Dimensions Tough 1 Hard Recommended
Machining Data
ap f turn f
(mm/ groove
Designation CW RE CWTOL(1) RETOL(2) BW DAXN(3) CDX (mm) rev) (mm/
GDMY 840 8.00 4.00 0.05 0.050 5.60 50.0 25.00 • • • • • • • • 0.00-4.00 0.32-0.67
rev)
0.18-0.34
• Can cut arcs to 250° • DMIN for internal machining = 65 mm • For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Minimum axial grooving diameter
For tools, see pages: C#-GHDR/L (274) • CGHN-8-10D (287) • GADR/L-8 (286) • GADR/L-JHP (287) • GAFG-R/L-8 (580) • GHDKR/L (446)
• GHDR/L (long pocket) (285) • GHDR/L-JHP (long pocket) (285) • GHFG-R/L-8 (579) • GHFGR/L-8 (579) • GHIR/L (W=7.0-8.3) (355)
GIMY-F ±0.1
Utility Single-Ended Inserts
for Grooving and Profiling 7° 5
Ductile Materials 15.3
CW BW
RE
Dimensions Tough 1 Hard Recommended Machining Data
IC8250 ap f turn f groove
IC808
Designation CW RE CWTOL(1) RETOL(2) BW IC908 (mm) (mm/rev) (mm/rev)
IC806 0.07-0.13
GIMY 315F IC804 0.11-0.21
GIMY 525F 0.13-0.25
GIMY 630F 3.00 1.50 0.05 0.050 2.40 • 0.00-1.50 0.18-0.26 0.18-0.34
GIMY 840F ••
5.00 2.50 0.05 0.050 3.90 •••• 0.00-2.50 0.23-0.42
6.00 3.00 0.05 0.050 5.00 0.00-3.00 0.24-0.50
8.00 4.00 0.05 0.050 5.60 •
0.00-4.00 0.32-0.67
• DMIN for internal applications =70 mm • Can cut arcs to 250° • For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: Anti-Vibration Blades (284) • C#-GHDR/L (274) • CGFG 51-P8 (580) • CGHN 26-M (356) • CGHN 32-DGM (358)
• CGHN 32-M (357) • CGHN-D (283) • CGHN-DG (283) • CGHN-P8 (283) • CGHN-S (282) • CGHR/L-P8DG (284) • CGPAD (281) • CGPAD-JHP (282)
• GHDR/L (short pocket) (275) • GHDR/L-JHP (short pocket) (276) • GHDR/L-JHP-MC (short pocket) (277) • GHGR/L (278) • GHMPR/L (273)
• GHMR/L (273) • GHSR/L (373) • GHSR/L-JHP-SL (374) • NQCH-GHSR/L-JHP (374)
GDMY-F ±0.1 30 Ref.
Utility Double-Ended Inserts 7º
for Grooving and Profiling 6.3 Ref.
Ductile Materials
CW
RE BW
Dimensions Tough 1 Hard Recommended Machining Data
IC808 ap f turn f groove
IC908 (mm/rev)
Designation CW RE CWTOL(1) RETOL(2) BW CDX(3) (mm) (mm/rev) 0.18-0.34
GDMY 840F • •
8.00 4.00 0.05 0.050 5.60 25.00 0.00-4.00 0.32-0.67
• DMIN for internal applications = 65 mm • For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: C#-GHDR/L (274) • CGHN-8-10D (287) • GADR/L-8 (286) • GADR/L-JHP (287) • GAFG-R/L-8 (580) • GHDR/L (long pocket) (285)
• GHDR/L-JHP (long pocket) (285) • GHFG-R/L-8 (579) • GHFGR/L-8 (579) • GHIR/L (W=7.0-8.3) (355)
291
