Page 58 - TURNING CATALOG p255-458

GROOVE-TURN PCHR/L-24 CWN-CWX f2 OAL
Grooving, Parting and 0.50-3.20 2.0 HBH
Recessing Holders Carrying 3.21-4.23 2.5
Inserts with 5 Cutting Edges 4.24-5.20 3.0 HF HBL H
5.21-6.20 3.5 CDX B
6.21-8.20 4.5 WF f1
f2 CWN-CWX Right-hand shown
WF=f1+f2

Designation H HF B CWN(2) CWX(3) f1 CDX(4) OAL LH HBH
6.0
PCHR/L 10-24 10.0 10.0 10.0 0.50 3.20 6.5 6.50 120.00 19.5 4.0
PCHR/L 12-24 12.0 12.0 12.0 0.50 3.20 8.5 6.50 120.00 19.5 -
16.0 16.0 16.0 0.50 3.20 12.5 6.50 120.00 19.5 -
PCHR/L 16-24 20.0 20.0 20.0 0.50 3.20 16.5 6.50 120.00 19.5 -
25.0 25.0 25.0 0.50 3.20 21.5 6.50 135.00 19.5 4.0
PCHR/L 20-24 16.0 16.0 16.0 3.21 5.20 11.5 6.40 120.00 21.5 -
20.0 20.0 20.0 3.21 5.20 15.5 6.40 120.00 21.5 -
PCHR/L 25-24 25.0 25.0 25.0 3.21 5.20 20.5 6.40 135.00 21.5 -
25.0 25.0 25.0 5.21 8.20 18.5 6.50 135.00 19.5
PCHR/L 16-24-5

PCHR/L 20-24-5

PCHR/L 25-24-5
PCHR/L 25-24-8 (1)

• WF=f1+f2 (according to insert width (CW) being used)
(1) Used with special inserts only
(2) Minimum cutting width
(3) Maximum cutting width
(4) For specific information, refer to insert data
For inserts, see pages: PENTA 24-BSPT (674) • PENTA 24-ISO (657) • PENTA 24-MT (646) • PENTA 24-NPT (670) • PENTA 24-UN (664)
• PENTA 24-W (668) • PENTA 24-WT (641) • PENTA 24N-C (320) • PENTA 24N-C (full radius) (321) • PENTA 24N-J (319) • PENTA 24N-J (full radius) (320)
• PENTA 24N-PF (full radius) (322) • PENTA 24N-PF/P (321) • PENTA 24N-Z (322) • PENTA 24R-C (531) • PENTA 24R-P (534) • PENTA 24R/L-J (530)
• PENTA 24R/L-Z (533)

Spare Parts

Designation SR 16-212-01397L T-15/5
SR 16-212-01397 T-15/5
PCHL 10-24 SR 16-212-01397L T-15/5
PCHR 10-24 SR 16-212-01397 T-15/5
PCHL 12-24 SR 16-212-01397L
PCHR 12-24 SR 16-212-01397
PCHL 16-24 SR 16-212-01397L
PCHR 16-24 SR 16-212-01397
PCHL 20-24 SR 16-212-01397L
PCHR 20-24 SR 16-212-01397
PCHL 25-24 SR PCHR/L-8-06642
PCHR 25-24 SR PCHR/L-8-06642
PCHR/L 16-24-5 SR PCHR/L-8-06642
PCHR/L 20-24-5 SR PCHR/L-8-06642
PCHR/L 25-24-5
PCHR/L 25-24-8

312 ISCAR