Page 56 - TURNING CATALOG p255-458

GROOVE-TURN CUTDIA CDX Ø17
18˚
PENTA 17R/L-SP-RS
Pentagonal Inserts (5 edges) 4˚ 2X RE PENTA 17R...SP...RS
with a High Positive Rake CW PSIRR PENTA 17L...SP...RS
for Parting Soft Materials
PSIRL

Dimensions Recommended
Machining Data

Designation CW RE CDX CUTDIA PSIRL PSIRR IC1007 f groove
0.60 1.2 6.0 - (mm/rev)
PENTA 17L03SP6D-RS 0.30 0.00 0.60 1.2 - 6.0
PENTA 17R03SP6D-RS 0.30 0.00 2.00 4.0 6.0 - • 0.02-0.03
PENTA 17L05SP6D-RS 0.50 0.00 2.00 4.0 - 6.0 • 0.02-0.03
PENTA 17R05SP6D-RS 0.50 0.00 2.50 5.0 6.0 - • 0.02-0.04
PENTA 17L08SP6D-RS 0.80 0.00 2.50 5.0 - 6.0 • 0.02-0.04
PENTA 17R08SP6D-RS 0.80 0.00 3.00 6.0 6.0 - • 0.02-0.04
1.00 0.00 3.00 6.0 - 6.0 • 0.02-0.04
PENTA 17L10SP6D-RS 1.00 0.00 • 0.02-0.05
PENTA 17R10SP6D-RS Ø17 • 0.02-0.05

For tools, see pages: PCADRS/LS-JHP (317) • PCHRS/LS-17-JHP (307) 4°

PENTA 17-NP-RS/LS CDX
Pentagonal Inserts for Precision 9°
Grooving and Turning Next to Dmax
High Shoulder Applications 7° CW

RE Recommended Machining Data

Dimensions

IC1008 ap f turn f groove

Designation CW CWTOL(1) RE RETOL(2) CDX D max • (mm) (mm/rev) (mm/rev)

PENTA 17-100NP08R/LS 1.00 0.020 0.08 0.020 3.00 32.0 (3) • 0.05-0.70 0.02-0.06 0.03-0.06

PENTA 17-200NP08R/LS 2.00 0.020 0.08 0.020 4.00 32.0 (3) • 0.05-2.50 0.05-0.15 0.05-0.09

PENTA 17-300NP08R/LS 3.00 0.020 0.08 0.020 4.00 32.0 (3) 0.05-3.10 0.05-0.19 0.05-0.11

• When turning to the opposite side of chipformer, maximum CDX is 0.5 mm • For cutting speed recommendations and user guide, see pages 419-428, 432-436

(1) Cutting width tolerance (+/-)

(2) Corner radius tolerance (+/-)

(3) for grooving

For tools, see pages: NQCH-PCHR/L-S-JHP (378) • PCHRS/LS-17 (307) • PCHRS/LS-17-JHP (307) • Y-PCHRS-17 (308) • Y-PCHRS-17-JHP (308)

Dimensions Dmax as a function of depth of cut (CDX)

Designation CW RE CDX CDX≤2.5 CDX≤3.0 CDX≤3.5 CDX≤3.8 CDX≤4.0

PENTA 17-100NP08-R/LS 1.00 0.08 3.00 N.L. 100 - - -
PENTA 17-200NP08-R/LS
PENTA 17-300NP08-R/LS 2.00 0.08 4.00 N.L. 100 75 45 32

3.00 0.08 4.00 N.L. 100 75 45 32

PENTA 17-ER/EL CW PSIR Ø17 3.5
Back Turning Pentagonal Inserts 2.4
for Short Chipping Materials 4°
0.2 RE
TC Recommended Machining Data

Dimensions

Designation CW RE PSIR Tc IC1008 ap f turn
0.70 0.00 60.0
PENTA 17EL00-07K0LS 0.70 0.00 60.0 4.0 • (mm) (mm/rev)
PENTA 17ER00-07K0RS 0.70 0.08 60.0 4.0 • 0.05-2.50 0.01-0.15
PENTA 17EL08-07K0LS 0.70 0.08 60.0 4.0 • 0.05-2.50 0.01-0.15
PENTA 17ER08-07K0RS 4.0 • 0.05-2.50 0.01-0.15
0.05-2.50 0.01-0.15

• For cutting speed recommendations and user guide, see pages 419-428, 432-436

For tools, see pages: PCHRS/LS-17 (307) • PCHRS/LS-17-JHP (307) • Y-PCHRS-17 (308) • Y-PCHRS-17-JHP (308)

310 ISCAR