Page 88 - TURNING CATALOG p255-458
P. 88
GROOVE-TURNGEPI ±0.025 10 Ref.
Precision Ground
IC528Double-Ended Inserts for8°2.9 Ref.
IC08Internal and External GroovingRE
IC908
CW
BW
Dimensions Tough 1 Hard Recommended Machining Data
ap f turn f groove
Designation CW RE CWTOL(2) RETOL(3) CDX(4) BW (mm) (mm/rev) (mm/rev)
1.85 1.80 • • • 0.15-0.50 0.05-0.07 0.03-0.05
GEPI 1.85-0.10 (1) 1.96 0.10 0.02 0.030 2.50 1.80 • • • 0.15-0.50 0.05-0.07 0.03-0.05
GEPI 1.96-0.10 1.96 0.05-0.07 0.03-0.05
GEPI 1.96-0.15 2.00 0.10 0.02 0.030 2.50 1.80 • • 0.20-0.50 0.05-0.07 0.03-0.05
GEPI 2.00-0.10 2.22 0.06-0.08 0.04-0.06
GEPI 2.22-0.10 2.22 0.15 0.02 0.030 2.50 1.80 • • • 0.15-0.60 0.06-0.08 0.04-0.06
GEPI 2.22-0.15 2.39 0.07-0.09 0.04-0.06
GEPI 2.39-0.10 2.39 0.10 0.02 0.030 9.00 1.80 • • • 0.15-0.60 0.07-0.09 0.04-0.06
GEPI 2.39-0.15 2.47 0.08-0.11 0.04-0.07
GEPI 2.47-0.20 0.10 0.02 0.030 9.00 1.80 •
2.50 0.07-0.09 0.04-0.07
GEPI 2.50-0.10 0.15 0.02 0.030 9.00 2.20 • 0.20-0.60
2.50 0.08-0.11 0.05-0.08
GEPI 2.50-0.20 2.70 0.10 0.02 0.030 9.00 0.15-1.00 0.09-0.12 0.05-0.08
GEPI 2.70-0.20 3.00 2.20 • • • 0.20-1.00 0.10-0.14 0.05-0.09
GEPI 3.00-0.20 3.18 0.15 0.02 0.030 9.00 2.20 • • • 0.25-1.10 0.11-0.14 0.06-0.10
GEPI 3.18-0.20
0.20 0.02 0.030 9.00
0.10 0.02 0.030 9.00 2.20 • 0.15-1.10
0.20 0.02 0.030 9.00 2.20 • • • 0.25-1.10
2.20 • • • 0.25-1.20
0.20 0.02 0.030 9.00 2.20 • • • 0.25-1.30
0.20 0.02 0.030 9.00 2.20 • • 0.25-1.40
0.20 0.02 0.030 9.00
• DMIN for internal application=11.5mm • For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Tool pocket should be modified
(2) Cutting width tolerance (+/-)
(3) Corner radius tolerance (+/-)
(4) Cutting depth maximum
For tools, see pages: AVC-GEAIR/L (346) • E-GEHIR / E-GHIR (340) • GEAIR/L (340) • GEHIMR/L (337) • GEHIMR/L-SC (337) • GEHIR/L (338)
• GEHIR/L-SC (339) • GEHSR (373) • GEHSR/L-SL (372)
GEPI (full radius) ±0.025 10 Ref.
Precision Double-Ended Full
Radius Inserts for Internal and 8° 2.9 Ref.
External Profiling and Grooving RE=CW/2
BW
Dimensions Tough 1 Hard Recommended Machining Data
IC528 ap f turn f groove
IC08
Designation CW RE CWTOL(1) RETOL(2) CDX(3) BW IC908 (mm) (mm/rev) (mm/rev)
0.08-0.12 0.04-0.07
GEPI 2.00-1.00 2.00 1.00 0.02 0.050 5.00 1.80 ••• 0.00-0.60 0.13-0.20 0.05-0.11
GEPI 3.00-1.50 ••• 0.13-0.21 0.06-0.11
GEPI 3.18-1.59 3.00 1.50 0.02 0.050 5.00 2.20 •• 0.00-1.50
3.18 1.59 0.02 0.050 5.00 2.20 0.00-1.59
• DMIN for internal application=11.5mm • For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: AVC-GEAIR/L (346) • E-GEHIR / E-GHIR (340) • GEAIR/L (340) • GEHIR/L (338) • GEHIR/L-SC (339) • GEHIUR/L (339)
• GEHSR (373) • GEHSR/L-SL (372)
342 ISCAR
