Page 90 - TURNING CATALOG p255-458

GROOVE-TURN GHIR/L (W=1.9-6.4) CDX HF
Internal Grooving and Turning Bars WB
DMIN
OAL
WF DCONMS
CWN-CWX
LDRED Right-hand shown

Designation CWN(1) CWX(2) DCONMS DMIN CDX(3) OAL LDRED WF HF WB
1.55
GHIR/L 20-3 1.90 3.50 20.00 20.00 4.50 160.00 16.0 14.50 9.0 1.60
GHIR/L 20-20-3 2.60
2.00 3.50 20.00 20.00 4.50 200.00 40.0 14.50 9.0 2.60
GHIR/L 20-4 2.10
3.00 4.80 20.00 20.00 4.50 160.00 25.0 14.50 9.0 2.10
2.80
GHIR/L 20-20-4 3.00 4.80 20.00 20.00 4.50 200.00 40.0 14.50 9.0 3.60
GHIR/L 25-25-4 3.60
GHIR/L 32-4 2.50 4.00 25.00 25.00 5.00 200.00 50.0 17.50 11.5 3.60
GHIR/L 25-5
GHIR/L 25-25-6 2.50 4.00 32.00 38.00 5.00 250.00 - 21.30 14.5

3.20 5.30 25.00 26.00 6.00 160.00 25.0 18.50 11.5

4.00 6.40 25.00 25.00 5.00 200.00 50.0 17.50 11.5

GHIR/L 32-6 4.00 6.40 32.00 39.00 6.50 250.00 - 22.80 14.5
GHIR/L 40-6 - 28.30 18.0
4.00 6.40 40.00 49.00 8.00 300.00

• When using TIPI inserts, toolholder seat needs to be modified according to insert profile to ensure clearance. • For user guide, see pages 419-428, 432-436

(1) Minimum cutting width

(2) Maximum cutting width

(3) Cutting depth maximum

For inserts, see pages: GIFI (352) • GIFI-E (349) • GIFI-E (full radius) (350) • GIMIY (349) • GINI-E (350) • GIPI (351)

• GIPI (full radius W<M) (351) • GIPI (full radius) (352) • GIPI (W<M) (350) • GIPI-E (349) • GIPI-RX/LX (352) • TIPI-MT (648) • TIPI-WT (642)

Spare Parts

Designation SR 76-1021 T-20/5
SR 76-1021 T-20/5
GHIR/L 20-3 SR 76-1021 T-20/5
GHIR/L 20-20-3 SR 76-1021 T-20/5
GHIR/L 20-4 SR 76-1022 T-20/5
GHIR/L 20-20-4 SR 76-1021 T-20/5
GHIR/L 25-25-4 SR 76-1022 T-20/5
GHIL 32-4 SR 76-1022 T-20/5
GHIR 32-4 SR 76-1022 T-20/5
GHIR/L 25-5 SR 76-1022 T-20/5
GHIR/L 25-25-6 SR 76-1022 T-20/5
GHIR/L 32-6 SR 76-1021 T-20/5
GHIL 40-6
GHIR 40-6

GHIR/L-C (W=4-6.4) LDRED
Grooving and Turning Bars
with Internal Coolant Holes CDX DCONMS
DMIN WF WB HF

CWN-CWX OAL

Right-hand shown

Designation DCONMS CWN(1) CWX(2) DMIN CDX(3) HF OAL LDRED WF WB Inlet

GHIR/L 25C-510 25.00 4.00 5.30 32.00 10.00 11.5 160.00 25.0 22.50 3.50 R1/8 SR 76-1022 T-20/5 PL 25
GHIR/L 32C-610 32.00 PL 32
40.00 4.80 6.40 43.00 10.00 14.5 200.00 - 26.20 4.40 R1/8 SR 76-1022 T-20/5 PL 40
GHIR/L 40C-612
4.80 6.40 53.00 12.00 18.0 250.00 - 32.20 4.40 R1/8 SR 76-1022 T-20/5

• When using TIPI inserts, toolholder seat needs to be modified according to insert profile to ensure clearance. • For user guide, see pages 419-428, 432-436
(1) Minimum cutting width
(2) Maximum cutting width
(3) Cutting depth maximum
For inserts, see pages: GIFI (352) • GIFI-E (349) • GIFI-E (full radius) (350) • GIMIY (349) • GINI-E (350) • GIPI (351)
• GIPI (full radius) (352) • GIPI-E (349) • TIPI-MT (648)

344 ISCAR