Page 43 - Iscars_World_Brochure_2018
P. 43

Turning Miniature Parts                                 Drilling with SUMOCHAM
        To accommodate small boring diameters, ISCAR has        The small diameter range of ISCAR’s SUMOCHAM
        developed positive and negative boring tools with       hole making line includes new drilling heads and tools
        steel and solid carbide shank options, new small size   covering diameters of 4 mm up to 5.9 mm, with 0.1
        inserts, and coolant channels directed precisely to the   mm increments. The 4 to 5.9 mm drilling range is
        insert’s cutting edges.                                 covered by 4 sizes of SUMOCHAM DCN drill bodies
                                                                in 3xD and 5xD length to diameter ratios; and is
        The tools carry new positive (single-sided) ground      designed especially for this industry. A user-friendly key
        EPGT and CCGT inserts. The EPGT insert has a            was specifically developed to enable easy mounting
        75°geometry designed for a minimum bore diameter        with no set-up time.
        of 4.5 mm, and the CCGT insert features an 80°
        geometry for minimum bore diameter of 5.0 mm, with      The medical device and implant industries have made
        shank sizes in a diameter range of 4 to 7 mm.           major and highly significant advances in miniaturizing
                                                                medical parts; it is up to cutting tool manufacturers
        Tools for negative (double-sided) inserts Dmin=12 mm    to enable the realization of these achievements by
        carry ground WNGP and DNGP inserts. WNGP has an         providing the tools for the job, however small.
        80° geometry for a minimum bore diameter of 12 mm
        and DNGP features a 55° geometry for minimum bore
        diameter of 13 mm, with shank sizes in a diameter
        range of 10 to 20 mm for forward and back turning
        operations.


        The VNGU, CNGX, CNGG and CXMG double-sided
        inserts with 4 cutting edges present an alternative to
        the conventional ISO standard positive inserts with
        only 2 cutting edges; operating similarly to positive
        inserts with the same corner angles, they provide the
        added advantage of double cutting edges.










































                                                                                                         ISCAR    43
   38   39   40   41   42   43   44   45   46   47   48