Page 25 - MILLING_CATALOG_INCH_2022_P1-P92
P. 25
DRVS THSZMS
HM90 E90A-MM-10 DC DCONMS Rd°
90° Endmills with a
MULTI-MASTER Threaded APMX
Adaptation Carrying HM90 LF OAL
AP.. 1003... Inserts
Designation DC CICT (1) APMX THSZMS LF OAL DCONMS DRVS (2) RMPX° (3) RPMX (4) Lbs
HM90 E90A-D.62-2-MMT10 .625 2 .394 T10 .870 1.330 .600 .512 3.2 66667 .06
HM90 E90A-D.75-2-MMT12 .750 2 .394 T12 .960 1.510 .720 .630 2.4 57307 .10
HM90 E90A-D.75-3-MMT12 .750 3 .394 T12 .960 1.510 .720 .630 2.4 57307 .09
• Do not apply lubricant to the MULTI-MASTER threaded connection • For adaptation see page 37 • For user guide see pages 586-592
(1) Number of inserts
(2) Clamping wrench size
(3) Maximum ramping angle
(4) Maximum RPM
For inserts, see pages: APCR 1003PDFR-P (492) • APCT 1003PDR-HM (492) • APKR 1003PDR-HM (492) • APKT 1003..R (494) • APKT 1003..TR-RM (494)
• APKT 1003PDR-HM (493) • APKT 1003PDTR-76 (494) • APKT 1003PDTR/L-RM (493) • APKT 1003R8T-FF (496) • HM90 APCR 100304PDFR-P/DP (491) ENDMILLS • SOLID CARBIDE • MULTI-MASTER
• HM90 APCT 1003 (490) • HM90 APKT 1003 (490) • HM90 APKT 1003PD-W (495) • HM90 APKW 1003PDR (495)
For holders, see pages: MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86) • MM S-A-C# (84) • MM S-A-HSK (672)
• MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88) • MM S-ER-H (89) • MM TS-A (85)
Spare Parts
Designation
HM90 E90A-MM-10 SR 34-505/HG T-8/53
DRVS THSZMS
HM90 E90A-MM-10-JHP DC DCONMS Rd°
90° JHP Endmills with a
MULTI-MASTER Threaded APMX
Adaptation Carrying HELI2000 LF
and HELIMILL Inserts OAL
Designation DC CICT (1) APMX OAL RMPX° (2) LF THSZMS TQ_3 (3) DRVS (4) DCONMS MIID (5) Lbs
HM90 E90A D16-2-MMT10-JHP .630 2 .3937 1.370 15.0 .921 T10 248 .512 .614 APKT 1003PDR-HM .22
HM90 E90A D20-3-MMT12-JHP .787 3 .3937 1.516 7.5 1.004 T12 248 .630 .776 APKT 1003PDR-HM .32
HM90 E90A D25-4-MMT15-JHP .984 4 .3937 1.850 7.5 1.181 T15 354 .787 .972 APKT 1003PDR-HM .11
• Do not apply lubricant to the MULTI-MASTER threaded connection • For adaptation see page 37 • For user guide see pages 586-592
(1) Number of inserts
(2) Maximum ramping angle
(3) Tool tightening torque Nxm (lbfxin)
(4) Torque key size
(5) Master insert identification
For inserts, see pages: APCR 1003PDFR-P (492) • APCT 1003PDR-HM (492) • APKR 1003PDR-HM (492) • APKT 1003..R (494) • APKT 1003..TR-RM (494)
• APKT 1003PDR-HM (493) • APKT 1003PDR-HM-CS (493) • APKT 1003PDTR-76 (494) • APKT 1003PDTR/L-RM (493) • APKT 1003R8T-FF (496)
• HM90 APCR 100304PDFR-P/DP (491) • HM90 APCT 1003 (490) • HM90 APKT 1003 (490) • HM90 APKT 1003PD-W (495) • HM90 APKW 1003PDR (495)
For holders, see pages: MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86) • MM S-A-C# (84) • MM S-A-HSK (672)
• MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88) • MM S-ER-H (89) • MM TS-A (85)
Spare Parts
Designation
HM90 E90A-MM-10-JHP SR 34-505/HG (a) BLD T08/M7 SW4-SD
(a) Recommended tightening torque for this item: 10.6 lbfxin
23
