Page 29 - MILLING_CATALOG_INCH_2022_P1-P92
P. 29
DRVS
HM90 E90AD-M-15-JHP
90° JHP Endmills With a FLEXFIT THSZMS DCONMS
Threaded Adaptation Carrying DC Rd°
HELI2000 and HELIMILL Inserts
APMX
LF
OAL
Designation DC CICT (1) APMX OAL RMPX° (2) LF THSZMS DRVS (3) DCONMS TQ_3 (4) MIID (5) MIID_2 (6) Lbs
HM90 E90AD D32-3-M16-JHP 1.260 3 .5630 2.559 5.3 1.575 M16 .984 1.201 355 ADKT 1505PDTR ADCT 1505R8T-FF .37
• For adaptation, see page 37 • For user guide, see pages 586-592 • When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and
threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the
TQ_3 parameter
(1) Number of inserts
(2) Maximum ramping angle
(3) Torque key size
(4) Tool tightening torque Nxm (lbfxin)
(5) Master insert identification
(6) Master insert identification 2 ENDMILLS • SOLID CARBIDE • MULTI-MASTER
For inserts, see pages: ADCR 1505PDFR (499) • ADCT 1505PDFR-HM (499) • ADKR 1505PDR/L (499) • ADKT 1505-FF (502) • ADKT 1505..R/L-HM (502)
• ADKT 1505PD-W (503) • ADKT 1505PDR/L-HM (500) • ADKT 1505PDTR-76 (501) • ADKT 1505PDTR/L-RM (501) • ADKW (CBN) (500) • ADKW (PCD) (500)
• ADMT 1505PDR-HS (501) • HM90 ADCR 1505PDFR-P (498) • HM90 ADCT 1505 (497) • HM90 ADCT 1505PDR-CF (498) • HM90 ADKT 1505 (497)
• HM90 ADKT 1505PD-W (502) • HM90 ADKW 1505PDR (504)
For holders, see pages: BT-ODP (FLEXFIT) (356) • C#-ODP (FLEXFIT) (356) • CAB M-M (FLEXFIT) (354) • DIN69871-ODP (Metric) (357)
• ER-ODP (358) • HSK A-ODP (FLEXFIT) (359) • S M (354) • S M-CF (355)
Spare Parts
Designation
HM90 E90AD-M-15-JHP SR 14-544/S (a) BLD T15/M7 SW6-T-SH
(a) Recommended tightening torque for this item: 42.5 lbfxin
T490 ELN-16
90° Endmills Carrying Tangentially DC DCONMS
Clamped Inserts with 4 Helical,
.630" Long Cutting Edges
APMX
LH
OAL
Designation DC CICT (1) APMX LH OAL DCONMS Shank (2) Lbs
T490 ELN D1.25-2-W1.00-16 1.250 2 .630 1.570 4.000 1.000 W .77 SR 14-591-S BLD T20/M7 SW6-T
T490 ELN D1.50-3-W1.00-16 1.500 3 .630 1.720 4.000 1.000 W .88 SR 14-591 BLD T20/M7 SW6-T
• For user guide see pages 586-592
(1) Number of inserts
(2) W-Weldon
For inserts, see pages: T490 LNAR-P (522) • T490 LNMT/LNHT 1607 (522)
H490 E90AX-17
90° Endmills Carrying H490 DC DCONMS
ANKX 17... Double-Sided Rd°
Rectangular Inserts with 4 APMX
Helical Cutting Edges LH
OAL
Designation DC CICT (1) APMX OAL LH DCONMS Shank (2) RMPX° (3) Lbs
H490 E90AXD1.25-2W1.25-17 1.250 2 .630 4.000 1.200 1.250 W 6.5 1.14 SR 14-591 SW6-T BLD T20/M7
H490 E90AXD1.5-3-W1.25-17 1.500 3 .630 4.000 1.200 1.250 W 4.4 1.20 SR 14-591 SW6-T BLD T20/M7
• Rampdown angle is valid only when the H490 ANKX 1706R15T-FF insert is used and tool diameter is .06" larger. • For user guide, see pages 586-592
(1) Number of inserts
(2) W-Weldon
(3) Maximum ramping angle
For inserts, see pages: H490 ANKX 1706-FF (514) • H490 ANKX/ANCX-17 (513)
27