Page 32 - MILLING_CATALOG_INCH_2022_P1-P92
P. 32
ENDMILLS • SOLID CARBIDE • MULTI-MASTER
E30 30°
30° Chamfering Endmills
DCX DC
DCONMS
APMX
LH
OAL
Designation DC DCX (1) CICT (2) APMX OAL LH DCONMS Shank (3) Lbs
E30 D .62-W .75 .625 1.610 3 .270 3.540 1.510 .750 W .63 SR 14-541 T-15/51
• For user guide see pages 586-592
(1) Cutting diameter maximum
(2) Number of inserts
(3) W-Weldon
For inserts, see pages: TPMT (510)
OAL
CH45-PN06 DCX
Upper and Bottom DC_2 DC
Chamfering Endmills Carrying DCONMS
Pentagonal Inserts 45˚ 45˚
APMX LU_2
APMX_2
LU
Designation DCX (1) DC_2 DC APMX APMX_2 DCONMS CICT (2) LU LU_2 OAL DMIN (3) Lbs
CH45-.39-1.2-1-C.50-PN06 .458 .330 .260 .0590 .0590 .500 1 1.1570 1.0000 4.000 .390 .17
CH45-.67-2.5-2-C.63-PN06 .655 .527 .449 .0590 .0590 .625 2 1.1570 1.0000 4.500 .670 .29
CH45-.75-3.2-3-C.75-PN06 .734 .606 .528 .0590 .0590 .750 3 1.1570 1.0000 5.250 .770 .00
(1) Cutting diameter maximum
(2) Number of inserts
(3) Minimum penetration diameter for back chamfering
For inserts, see pages: PNMT 0602-TN (583)
Spare Parts
Designation
CH45-PN06 SR M2.5X5-T7-60 T-7/51
DCX LF OAL DRVS THSZMS
DC_2 DC
CH45-MM-PN06 DCONMS
Upper and Bottom Chamfering 45˚ 45˚
Endmills with MULTI-MASTER APMX
Threaded Adaptation APMX_2
LF_2
Designation DCX (1) DC_2 DC APMX APMX_2 LF LF_2 OAL DCONMS THSZMS CICT (2) DRVS (3) DMIN (4) Lbs
CH45-10/.39-1-MMT05-PN06 .461 .333 .260 .0590 .0590 .512 .354 .778 .299 T05 1 .217 .394 .01
CH45-17/.67-2-MMT08-PN06 .657 .530 .449 .0590 .0590 .709 .551 1.004 .480 T08 2 .394 .669 .05
CH45-19/.75-3-MMT10-PN06 .736 .608 .528 .0590 .0590 .787 .630 1.232 .602 T10 3 .512 .748 .05
• Do not apply lubricant to the MULTI-MASTER threaded connection • For adaptation options, see page 37 • For user guide, see pages 586-592
(1) Cutting diameter maximum
(2) Number of inserts
(3) Width across flats (wrench should be ordered separately)
(4) Minimum penetration diameter for back chamfering
For inserts, see pages: PNMT 0602-TN (583)
For holders, see pages: MM CAB (733) • MM CAB-T-T (90) • MM GRT (shanks) (85) • MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86)
• MM S-A-C# (84) • MM S-A-HSK (672) • MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88)
• MM S-ER-H (89) • MM TS-A (85)
Spare Parts
Designation
CH45-MM-PN06 SR M2.5X5-T7-60 T-7/51
30 ISCAR