Page 31 - MILLING_CATALOG_INCH_2022_P1-P92
P. 31

Rd°

             P290 EPW-M                                        DC                   THSZMS  DCONMS
                Endmills with FLEXFIT Threaded
             Adaptation, Carrying .472 and                                 DRVS
             .708" Long Edged Inserts                               APMX  LF
                                                                          OAL
                Designation          DC    APMX   CICT (1)  LF  OAL  THSZMS DCONMS  DRVS (2)  RMPX° (3)  CSP (4)  TQ_3 (5)  Lbs
              P290 EPW D0.75-2-M10-12   .750   .472  2   1.770  1.970  M10    .700   .590  2.0    0     260     .09
              P290 EPW D1.00-3-M12-12  1.000   .472  3   1.180  2.047  M12    .820   .750  1.4    1     295     .15
              P290 EPW D1.50-4-M16-18  1.500   .708  4   1.575  2.559  M16   1.142   .984  2.0    1     355     .41
             •  For adaptation see page 37    •  For user guide, see pages 586-592   •  When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and
             threaded areas must be thoroughly cleaned.  Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the
             TQ_3 parameter
             (1)  Number of inserts
             (2)  Clamping wrench size
             (3)  Maximum ramping angle
             (4)  0 - Without coolant supply, 1 - With coolant supply                                                    ENDMILLS • SOLID CARBIDE • MULTI-MASTER
             (5)  Tool tightening torque Nxm (lbfxin)
             For inserts, see pages: P290 ACCT/KT (503) • P290 ACKT (503)


























             Spare Parts

              Designation
              P290 EPW D0.75-2-M10-12            SR M3X0.5-L7.4 IP9 (a)  IP-9/151
              P290 EPW D1.00-3-M12-12            SR M3X0.5-L7.4 IP9 (a)  IP-9/151
              P290 EPW D1.50-4-M16-18               SR 14-544/S                        BLD T15/M7       SW6-T-SH
             (a)

                                                                                                                Rd°
             HP E90AT-19
             90° Endmills Carrying HP                           DC                      DCONMS
             AD.. 1906.. Inserts
                                                                   APMX
                                                                      LU
                                                                            OAL

              Designation            DC   CICT (1)  APMX  OAL  LU  DCONMS RMPX° (2)  RPMX (3)  Shank (4)  Lbs
              HP E90AT-D1.00-2-W1.00-19  1.000  2   .736  4.000  1.70  1.000  14.0  27600  W   .68  SR 14-571/L  SW6-SD  BLD T10/S7
              HP E90AT-D1.25-3-W1.25-19  1.250  3   .724  4.000  1.70  1.250  7.0  18405  W  1.07  SR 14-571/L  SW6-SD  BLD T10/S7
              HP E90AT-D1.50-3-W1.25-19  1.500  3   .720  4.000  1.70  1.250  6.0  16800  W  1.17  SR 14-571/L  SW6-SD  BLD T10/S7
             •  First loosely attach the inner clamping screw, then the outer one. In the same order tighten them both.   •  For user guide, see pages 586-592
             (1)  Number of inserts
             (2)  Maximum ramping angle
             (3)  Maximum RPM
             (4)  W-Weldon
             For inserts, see pages: HP ADCR 1906 (506) • HP ADKT/ADCT 1906 (506)

                                                                                                                       29
   26   27   28   29   30   31   32   33   34   35   36