Page 33 - MILLING_CATALOG_INCH_2022_P229-P360
P. 33
DHUB
F45NM DCONMS
45° Face Mills Carrying
Octagonal ONHU/MU 0806... OAL
Inserts with 16 Cutting Edges
44.3° FACE MILLS
DC APMX
DCX
Designation DC DCX (2) CICT (3) APMX OAL DHUB DCONMS Arbor (4) Lbs
F45NM D2.5-05-1.00-R08 2.500 2.990 5 .220 1.750 2.200 1.000 A 1.29
F45NM D3.0-06-1.00-R08 (1) 3.000 3.490 6 .220 1.750 2.210 1.000 B 1.58
F45NM D4.0-07-1.50-R08 (1) 4.000 4.490 7 .220 2.000 3.270 1.500 B 1.19
F45NM D5.0-08-1.50-R08 (1) 5.000 5.490 8 .220 2.000 3.270 1.500 B 5.04
F45NM D6.0-10-2.00-R08 (1) 6.000 6.490 10 .220 2.000 3.940 2.000 B 6.52
F45NM D8.0-12-2.50-R08 8.000 8.490 12 .220 2.500 5.310 2.500 C 13.84
F45NM D10.0-14-2.50-R08 10.000 10.490 14 .220 2.500 5.390 2.500 C 20.77
• Wiper inserts are used on face mill cutters, providing improved surface finish, thus eliminating the use of other finishing cutters • For user guide, see page 586-591
(1) For internal coolant through the holder, use a matching coolant set (should be ordered separately)
(2) Cutting diameter maximum
(3) Number of inserts
(4) For adaptation options, see page 592
For inserts, see pages: ONHQ-TN (557) • ONHU 0806-N-PL (557) • ONHU 0806AN-W (558) • ONHU/ONMU 080608 AN-N-HP (558) • ONHU/ONMU-08-TN-MM (557) •
ONHU/ONMU-08-TN/HL (556)
Spare Parts
Designation
F45NM D2.5-05-1.00-R08 SR 14-591/H BLD T20/S7 SW6-T SR UNF 1/2X20X1 B18.3
F45NM D3.0-06-1.00-R08 SR 14-591/H BLD T20/S7 SW6-T
F45NM D4.0-07-1.50-R08 SR 14-591/H BLD T20/S7 SW6-T
F45NM D5.0-08-1.50-R08 SR 14-591/H BLD T20/S7 SW6-T
F45NM D6.0-10-2.00-R08 SR 14-591/H BLD T20/L7 SW6-T
F45NM D8.0-12-2.50-R08 SR 14-591/H BLD T20/L7 SW6-T
F45NM D10.0-14-2.50-R08 SR 14-591/H BLD T20/L7 SW6-T
261