Page 60 - MILLING_CATALOG_INCH_2022_P229-P360
P. 60
DHUB
EXTENDED FLUTE CUTTERS
T430/T445/T460 SM DCONMS
30°, 45° and 60° Extended
Flute Face Mills, Carrying KAPR OAL
T490 LNMT/LNHT 13... APMX
Tangentially Clamped Inserts
DC
DCX
Designation DC APMX DCX (1) KAPR (2) NOF (3) ZNP (4) OAL DHUB DCONMS Arbor (5) Lbs
T430 SMD2.0-.63-3-1.25-13 2.000 .637 4.252 30.0 3 9 2.500 2.560 1.250 A 3.84
T445 SMD2.0-.94-3-1.25-13 2.000 .940 3.900 45.0 3 9 2.250 2.560 1.250 A 2.84
T445 SMD2.5-.94-4-1.25-13 2.500 .940 4.403 45.0 4 12 2.250 2.560 1.250 A 3.61
T460 SMD2.0-1.18-3-1.0-13 2.000 1.180 3.388 60.0 3 9 2.165 2.360 1.000 A 2.21
• Note: RPM should be considered according to the recommended speed applied on the outer diameter obtained by the specific D.O.C. • For user guide, see pages 586-591
(1) Cutting diameter maximum
(2) Tool cutting edge angle
(3) Number of flutes
(4) Number of peripheral inserts
(5) For adaptation see page 592
For inserts, see pages: T490 LNAR-P (522) • T490 LNMT 1306PNTR-FW (521) • T490 LNMT/LNHT/LNAR 1306 (520)
Spare Parts
Designation
T430 SMD2.0-.63-3-1.25-13 SR 34-535-SN BLD T15/S7 SW6-T-SH SR UNF 5/8X1.5 B18.3
T445 SMD2.0-.94-3-1.25-13 SR 34-535-SN BLD T15/S7 SW6-T-SH SR UNF 5/8X1.25 B18.3
T445 SMD2.5-.94-4-1.25-13 SR 34-535-SN BLD T15/S7 SW6-T-SH SR UNF 5/8X1.25 B18.3
T460 SMD2.0-1.18-3-1.0-13 SR 34-535-SN BLD T15/S7 SW6-T-SH SR UNF 1/2X1½ B18.3
288 ISCAR