Page 35 - MILLING_CATALOG_INCH_2022_P361-P592
P. 35
DHUB
SDN-XN13 DCON
Full Slot Disk Type Slotting
Cutters Carrying XNMU 1306 OAL CW
Square Inserts with 4 Right- and
4 Left-Hand Cutting Edges CDX
DC
Designation DC CICT (1) ZEFP CW CDX (2) DHUB DCONMS OAL Lbs
SDN D4.0-0.56-10-XN13 4.000 10 10 .560 1.004 1.765 1.250 .625 .92 SR M4-L15-D4.5 BLD IP15/S7 SW6-T-SH
SDN D5.0-0.62-12-XN13 5.000 12 6 .620 1.270 2.250 1.500 .750 1.81 SR M4-L15-D4.5 BLD IP15/S7 SW6-T-SH
SDN D6.0-0.75-12-XN13 6.000 14 7 .750 1.750 2.250 1.500 .875 3.38 SR M4-L15-D4.5 BLD IP15/S7 SW6-T-SH
SDN D8.0-0.75-16-XN13 8.000 16 8 .750 2.425 3.000 2.000 .875 5.62 SR M4-L15-D4.5 BLD IP15/S7 SW6-T-SH
• For user guide, see pages 410-416 SLOTTING & SLITTING CUTTERS
(1) Number of inserts
(2) Cutting depth maximum
For inserts, see pages: XNMU 13 (556)
SDN-CALN13 DHUB
Full Slot Adjustable Slotting CDX DCON
Cutters with Cartridges Carrying
T490 LNHT 1306PNTR/L Inserts CW OAL
DC
Designation DC OAL CWN (1) CWX (2) CDX (3) CICT (4) ZEFP DHUB DCON Lbs
SDN D5-.68-.9-12-CALN13 5.039 1.000 .690 .900 1.240 8 4 2.250 1.500 2.69
SDN D6-.68-.9-12-CALN13 6.039 1.000 .690 .900 1.730 10 5 2.250 1.500 3.86
SDN D8-.68-.9-16-CALN13 8.039 1.250 .690 .900 2.220 14 7 3.000 2.000 7.47
• Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly
• Half of the inserts are used on right-hand cartridges and half on left-hand cartridges • Gang-mill assembly SDN and left-hand SSB cutters feature two keyways
• To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position. • For cartridge details, see page 397
(1) Minimum cutting width • The cutter will be set to the minimum width range, unless a specific width is requested by the user
(2) Maximum cutting width
(3) Cutting depth maximum
(4) Number of inserts
For inserts, see pages: T490 LNMT/LNHT/LNAR 1306 (520)
Nut
Cartridge Screw-SR 14-2120
Key: BLD IP25/S7
SW6-T T490 LNHT 1306...Insert
Right Hand Cartridge
Insert Screw-SR 34-535
Key: BLD T15/S7
SW6-T
Spare Parts
Designation
SDN-CALN13 CA90 1723-R/L-T490-13
395
