Page 37 - MILLING_CATALOG_INCH_2022_P361-P592
P. 37
DHUB
SSB-LN15-R/L DCONMS CDX
Single-Side Cutting, Disk
Type Slotting Cutters OAL
APMX LU
DC
Designation DC NOF (1) CDX (2) APMX DHUB DCONMS LU OAL Lbs
SSB D3.0-.875-08-LN15-L 3.000 9 .750 .551 1.500 1.000 .880 1.000 1.62 SR 34-535 BLD T15/M7 SW6-T-SH
SSB D3.0-.875-08-LN15-R 3.000 9 .750 .551 1.500 1.000 .880 1.000 1.16 SR 34-535 BLD T15/M7 SW6-T-SH
SSB D5.0-.875-12-LN15-L 5.000 15 1.375 .551 2.250 1.500 .880 1.000 3.52 SR 34-535 BLD T15/M7 SW6-T-SH
SSB D6.0-.875-12-LN15-L 6.000 19 1.875 .551 2.250 1.500 .880 1.000 5.33 SR 34-535 BLD T15/M7 SW6-T-SH
SSB D6.0-.875-12-LN15-R 6.000 19 1.875 .551 2.250 1.500 .880 1.000 4.85 SR 34-535 BLD T15/M7 SW6-T-SH SLOTTING & SLITTING CUTTERS
• Note: Left-hand cutters are designated by a yellow groove
(1) Number of flutes
(2) Cutting depth maximum
For inserts, see pages: LNAR 1506 (529) • LNAT 1506-W (530) • LNAT 1506..PN-N MM (530) • LNAW-15 (CBN) (526) • LNHW 1506 PNTN (ceramic) (529)
• LNKX 1506 1.5X45 PN-N (528) • LNMT/LNHT 1506...-N HT (529) • LNMT/LNHT 1506PN-R HT (528) • LNMW 1506 PNTN (527)
Gang-Mill Assembly 90º lead angle cutter
SDN and left-hand SSB For D=3.0” lead angle cutter a=6º
cutters feature two keyways. For D≥4.0” lead angle cutter a=4.5º
It is recommended to a°
assemble gang-mills
with alternating keyway .551 .276
position. This practice
reduces vibration.
LNMT 1506 PNTN-HT LNKX 1506... LNMT 1506PN-R-HT
R.H./L.H. LNMT 1506... R.H. only
R.H./L.H.
CA90 1928-R/L-PM15 Cartridge Screw-SR 14-2120 Nut
Adjustable Cartridge for SDN and Key: BLD IP25/S7 LNAT 1506...Insert
SW6-T
FDN-CAPM15 Slotting Cutters
Right Hand Cartridge Insert Screw-SR 34-535
Key: BLD T15/S7
SW6-T
Designation ap min ap max
CA90 1928-R/L-PM15-A (1) .744 1.008 SR 34-535 NUT M5-4.5 SR 14-2120
CA90 1928-R/L-PM15-B (2) .744 1.008 SR 34-535 NUT M5-4.5 SR 14-2120
CA90 1928-R/L-PM15-C (3) .744 1.008 SR 34-535 NUT M5-4.5 SR 14-2120
(1) For inserts with .031-.063" radii
(2) For inserts with .098-.126" radii
(3) For inserts with .157"m radius
Nut
CA90 1723-R/L-T490-13 Cartridge Screw-SR 14-2120
Adjustable Cartridge for Key: BLD IP25/S7
SDN and FDN-CALN13 SW6-T T490 LNHT 1306...Insert
Right Hand Cartridge Insert Screw-SR 34-535
Key: BLD T15/S7
SW6-T
Designation ap min ap max
CA90 1723-R/L-T490-13 .689 .906 SR 34-535-SN SR 14-2120 NUT M5-4.5
397