Page 39 - MILLING_CATALOG_INCH_2022_P361-P592

CW

TGSF-JHP WB DCONMS
Slitting Cutters with Screw PSI Max
Coolant Channels Carrying DHUB
TANG-GRIP Inserts DC
CDX

Designation CW DC CICT (1) WB DHUB DCONMS CDX RPMX (2) MIID (3)
TGSF 63-3-10K-JHP .118 2.480 6 .098 1.260 .394 .551 5000 TAG N3C ETG 3-4-SH*
TGSF 80-3-22K-JHP .118 3.150 6 .098 1.575 .866 .748 3900 TAG N3C ETG 3-4-SH*
TGSF 100-3-22K-JHP .118 3.937 6 .098 1.575 .866 1.142 3820 TAG N3C ETG 3-4-SH*
TGSF 125-3-32K-JHP .118 4.921 8 .098 2.165 1.260 1.339 3820 TAG N3C ETG 3-4-SH*
TGSF 63-4-10K-JHP .157 2.480 6 .130 1.260 .394 .551 5000 TAG N4C ETG 3-4-SH* SLOTTING & SLITTING CUTTERS
TGSF 80-4-22K-JHP .157 3.150 6 .130 1.575 .866 .748 3900 TAG N4C ETG 3-4-SH*
TGSF 100-4-22K-JHP .157 3.937 6 .130 1.575 .866 1.142 3820 TAG N4C ETG 3-4-SH*
TGSF 125-4-32K-JHP .157 4.921 8 .130 2.165 1.260 1.339 3820 TAG N4C ETG 3-4-SH*
• ETG extractor should be ordered separately
(1) Number of inserts
(2) Maximum RPM
(3) Master insert identification
* Optional, to be ordered separately
For inserts, see pages: TAG N-A (401) • TAG N-C/W/M (400) • TAG N-J/JS/JT (401)
For holders, see pages: SW/S-JHP (399)

SW--JHP Type S--JHP Type
SW/S-JHP LF PSI Max
Drive Shanks with Coolant
Channels for SELF-GRIP Screw BD DBC DCONWS DCONMS DBC DCONWS DCONMS BD
Slitting Cutters
Pin LB
LF

Designation DCONMS BD DCONWS DBC LB LF Lbs
SW 1.00-32-JHP 1.000 1.2600 .3940 1.000 .984 4.331 .98 SR 76-961 T-15/5
SW 1.25-40-JHP 1.250 1.5750 .8660 1.280 1.181 4.724 1.65 SR 76-963 T-15/5
S 1.25-55-JHP 1.250 2.1650 1.2600 1.772 - 2.362 1.86 SR 76-943 T-20/5
For tools, see pages: TGSF-JHP (399)

OAL CW
TGSF-M-JHP THSZMS LF
Grooving and Slitting Small CDX
Diameter Cutters with FLEXFIT
Threaded Adaptation DCONMS DC PSI

DRVS

Designation DC CW CDX CICT (1) DCONMS THSZMS LF OAL DRVS (2) Insert TQ_3 (3)
TGSF 50-2-M12 5Z-JHP 1.968 .079 .512 5 .827 M12 .425 .945 .669 TAG 2 295 ETG 2*
TGSF 50-3-M12 5Z-JHP 1.968 .118 .512 5 .827 M12 .421 .972 .669 TAG 3 295 ETG 3-4-SH*
• For best performance use internal coolant with "CH" type shanks • When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and
threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the
TQ_3 parameter
(1) Number of inserts
(2) Torque key size
(3) Tool tightening torque Nxm (lbfxin)
* Optional, to be ordered separately
For inserts, see pages: TAG N-A (401) • TAG N-C/W/M (400) • TAG N-J/JS/JT (401)
For holders, see pages: BT-ODP (FLEXFIT) (356) • C#-ODP (FLEXFIT) (356) • CAB M-M (FLEXFIT) (354) • CAT-ODP (FLEXFIT) (360)
• DIN69871-ODP (Metric) (357) • ER-ODP (358) • HSK A-ODP (FLEXFIT) (359) • S M (354) • S M-CF (355)

399