Page 61 - MILLING_CATALOG_INCH_2022_P361-P592

DHUB
HM90 FAL-16 DCONMS
Face Mills Carrying
HM90 APCR 1605... Rd°
Inserts for Machining Aluminum OAL

APMX
DC

Designation DC APMX (1) CICT (2) OAL DHUB DCONMS Arbor (3) RMPX° (4) RPMX (5) Lbs
HM90 FAL-D2.00-.75-16 2.000 .610 3 1.750 1.880 .750 A 10.4 30500 .72
HM90 FAL-D2.50-1.00-16 2.500 .610 3 2.000 2.170 1.000 A 7.5 22987 1.20
HM90 FAL-D3.00-1.00-16 3.000 .610 3 2.000 2.170 1.000 B 6.7 18125 1.64 CUTTERS FOR ALUMINUM
HM90 FAL-D4.00-1.50-16 4.000 .610 4 2.250 3.500 1.500 B 4.1 14500 3.79
HM90 FAL-D5.00-1.50-16 5.000 .610 5 2.250 3.860 1.500 B 3.1 11611 5.69
• Insert tightening torque: 53 lbf x in
• HM90 APCR 1605..R-P inserts with corner radii .126 and .157" require pocket modification, corners larger than .177" should be used only on BR tools
• For user guide, see pages 586-591
(1) D.O.C. changes according to insert radius. .622 is the value for HM90 APCR 160520R-P
(2) Number of inserts
(3) For adaptation see page 592
(4) Maximum ramping angle
(5) Maximum RPM
For inserts, see pages: HM90 APCR 1605..R-P (508)

Spare Parts

Designation
HM90 FAL-D2.00-.75-16 SR 14-0180 BLD T20/M7 SW6-T SR UNF 3/8X1.25 B18.3
HM90 FAL-D2.50-1.00-16 SR 14-0180 BLD T20/M7 SW6-T SR UNF 1/2X20X1 B18.3
HM90 FAL-D3.00-1.00-16 SR 14-0180 BLD T20/M7 SW6-T SR UNF 1/2X20X1 B18.3
HM90 FAL-D4.00-1.50-16 SR 14-0180 BLD T20/M7 SW6-T
HM90 FAL-D5.00-1.50-16 SR 14-0180 BLD T20/M7 SW6-T

421