Page 65 - MILLING_CATALOG_INCH_2022_P361-P592

DHUB
HM90 FAL-15 DCONMS
Face Mills Carrying
HM90 AXCR 1505.. Rd°
Inserts for Machining Aluminum OAL
APMX
DC

Designation DC APMX CICT (1) OAL DHUB DCONMS Arbor (2) RMPX° (3) RPMX (4) Lbs
HM90 FAL-D2.00-4-.75-15 2.000 .551 4 1.750 1.930 .750 A 6.5 23000 .74
• Insert tightening torque: 31 lbfxin • For user guide, see pages 586-591 (1) Number of inserts
(2) For adaptation see page CUTTERS FOR ALUMINUM
(3) Maximum ramping angle
(4) Maximum RPM
For inserts, see pages: HM90 AXCR 1505 (508)

Spare Parts
Designation
HM90 FAL-15 SR 14-562 BLD T10/S7 SW6-SD SR UNF 3/8X1.25 B18.3

DHUB
HM90 FAL-22 DCONMS
Face Mills Carrying Rd°
HM90 APCR 2206... OAL
Inserts for Machining Aluminum APMX

DC

Designation DC APMX CICT (1) OAL DHUB DCONMS Arbor (2) RMPX° (3) RPMX (4) Lbs
HM90 FAL-D2.00-0.75-22 2.000 .866 2 2.000 1.930 .750 A 10.0 21000 .73
HM90 FAL-D2.50-1.00-22 2.500 .866 3 2.000 2.360 1.000 A 7.0 16000 1.12
HM90 FAL-D3.00-1.00-22 3.000 .866 3 2.000 2.360 1.000 A 5.0 14000 1.42
HM90 FAL-D4.00-1.50-22 4.000 .866 4 2.000 3.200 1.500 B 4.0 13000 2.67
• D.O.C. changes according to insert radius • APMX .807 is the value for HM90 APCR220650 • Insert tightening torque: 53 lbfxin
• When using this cutter with a .252" radius insert, the seat must be changed to assure the insert's compatibility with the tool
• For user guide, see pages 586-591
(1) Number of inserts
(2) For adaptation see page 592
(3) Maximum ramping angle
(4) Maximum RPM
For inserts, see pages: HM90 APCR 2206..R-P (509) • HM90 APCR 220605-CS (509)

Spare Parts

Designation
HM90 FAL-D2.00-0.75-22 SR 14-0180 BLD T20/M7 SW6-T SR UNF 3/8X1.25 B18.3
HM90 FAL-D2.50-1.00-22 SR 14-0180 BLD T20/M7 SW6-T SR UNF 1/2X20X1 B18.3
HM90 FAL-D3.00-1.00-22 SR 14-0180 BLD T20/M7 SW6-T SR UNF 1/2X20X1 B18.3
HM90 FAL-D4.00-1.50-22 SR 14-0180 BLD T20/M7 SW6-T

425