Page 59 - MILLING_CATALOG_INCH_2022_P93-P228

continued
CHWx45˚
RE C-Cylindrical
EC-E7/H7-CF W-Weldon
7 Flute Endmills with Different DC DCONMS
Helix and Variable Pitch APMX FHA˚ SL-Safe-Lock®
for CHATTERFREE High OAL
Speed Finish Milling

M E T R I C
Recommended
Dimensions
Machining Data

IC902 fz
Designation DC DCONMS APMX OAL Shank (2) NOF (3) FHA RE RETOL (4) CHW KCH RMPX° (5) (mm/t)
EC-H7 20-40C20CFR3.0-M104 20.00 20.00 40.00 104.00 C 7 37.0 3.00 0.060 - - 3.0 • 0.05-0.13
EC-H7 20-40C20CFR4.0-M104 20.00 20.00 40.00 104.00 C 7 37.0 4.00 0.080 - - 3.0 • 0.05-0.13
EC-H7 20-40SL20CF-M104 (1) 20.00 20.00 40.00 104.00 SL 7 37.0 0.00 - - - 3.0 • 0.04-0.12
EC-H7 20-40SL20CFR1M104 (1) 20.00 20.00 40.00 104.00 SL 7 37.0 1.00 - - - 3.0 • 0.05-0.15 ENDMILLS • SOLID CARBIDE • MULTI-MASTER
EC-H7 20-40W20CF-M104 20.00 20.00 40.00 104.00 W 7 37.0 0.00 - - - 3.0 • 0.05-0.13
EC-H7 20-60C20CF-M140 20.00 20.00 60.00 140.00 C 7 37.0 - - 0.40 45.0 3.0 • 0.05-0.13
EC-H7 20-60C20CFR1.0-M140 20.00 20.00 60.00 140.00 C 7 37.0 1.00 0.060 - - 3.0 • 0.05-0.13
EC-H7 20-60C20CFR2.0-M140 20.00 20.00 60.00 140.00 C 7 37.0 2.00 0.060 - - 3.0 • 0.05-0.13
EC-H7 20-60C20CFR2.5-M140 20.00 20.00 60.00 140.00 C 7 37.0 2.50 0.060 - - 3.0 • 0.05-0.13
EC-H7 20-60C20CFR3.0-M140 20.00 20.00 60.00 140.00 C 7 37.0 3.00 0.060 - - 3.0 • 0.05-0.13
EC-H7 20-60C20CFR4.0-M140 20.00 20.00 60.00 140.00 C 7 37.0 4.00 0.080 - - 3.0 • 0.05-0.13
EC-H7 20-60SL20CF-M140 (1) 20.00 20.00 60.00 140.00 SL 7 37.0 - - 0.40 45.0 3.0 • 0.05-0.15
EC-H7 20-80C20CF-140 20.00 20.00 80.00 140.00 C 7 37.0 - - 0.40 45.0 3.0 • 0.05-0.13
EC-H7 20-80C20CFR1.0-M140 20.00 20.00 80.00 140.00 C 7 37.0 1.00 0.060 - - 3.0 • 0.05-0.13
• Enables processing at a radial width of cut (AE) of up to 0.10xDC ,For user guide,see pages 219-228
(1) With Safe-Lock® (by Haimer) pull-out prevention helical grooves
(2) C-Cylindrical, W-Weldon, SL-Safe-Lock® (by Haimer)
(3) Number of flutes
(4) Corner radius tolerance (+/-)
(5) Maximum ramping angle

151