Page 69 - NEW_PRODUCT_CATALOG_2022

DHUB
FFQ8-12 DCONMS
Fast Feed Face Mills Carrying
Double-Sided Inserts OAL APMX
with 8 Cutting Edges
12˚ Rd°
DC
DCX

Designation DC DCX (1) APMX CICT (2) OAL DHUB DCONMS Arbor RMPX° (3) MDN (4) MDX (5) MIID (6) kg
FFQ8 D050-05-22-12 30.60 50.00 1.50 5 40.00 48.00 22.00 A 0.3 80.60 99.00 FFQ8 SZMU 120520 0.46
FFQ8 D063-06-22-12 43.60 63.00 1.50 6 40.00 48.00 22.00 A 0.2 106.60 125.00 FFQ8 SZMU 120520 0.94
FFQ8 D080-07-27-12 60.60 80.00 1.50 7 50.00 60.00 27.00 A 0.2 140.60 159.00 FFQ8 SZMU 120520 1.98
FFQ8 D100-08-32-12 80.60 100.00 1.50 8 50.00 78.00 32.00 B 0.1 180.60 199.00 FFQ8 SZMU 120520 3.03
• Radius for programming 3.6 mm • To generate a straight surface without cusps, the width of cut must not exceed DC • For slot milling or machining with high tool
overhang, the maximum depth of cut should be reduced by 30%.
(1) Cutting diameter maximum
(2) Number of inserts
(3) Maximum ramping angle
(4) Machinable diameter minimum for interpolation
(5) Machinable diameter maximum for interpolation
(6) Master insert identification

Spare Parts
Designation
FFQ8 D050-05-22-12 SR M4X0.7-L11.5 IP15 BLD IP15/S7 SW6-T-SH SR M10X25 DIN912
FFQ8 D063-06-22-12 SR M4X0.7-L11.5 IP15 BLD IP15/S7 SW6-T-SH SR M10X25 DIN912
FFQ8 D080-07-27-12 SR M4X0.7-L11.5 IP15 BLD IP15/S7 SW6-T-SH SR M12X30DIN912
FFQ8 D100-08-32-12 SR M4X0.7-L11.5 IP15 BLD IP15/M7 SW6-T-SH

FF MF
Fast Feed Moderate Feed

One Insert for both
Fast Feed and Moderate Feed Milling

67