Page 70 - NEW_PRODUCT_CATALOG_2022

DHUB
MFQ8-12 DCONMS
Moderate Feed Face Mills
Carrying Double-Sided Inserts OAL APMX
with 8 Cutting Edges
22˚
DC
DCX

Designation DC DCX (1) APMX CICT (2) OAL DHUB DCONMS Arbor MIID (3) kg
MFQ8 D050-05-22-12 31.60 50.00 3.00 5 40.00 48.00 22.00 A FFQ8 SZMU 120520 0.44
MFQ8 D063-06-22-12 44.60 63.00 3.00 6 40.00 48.00 22.00 A FFQ8 SZMU 120520 0.84
MFQ8 D080-07-27-12 61.60 80.00 3.00 7 50.00 60.00 27.00 A FFQ8 SZMU 120520 1.84
MFQ8 D100-08-32-12 81.60 100.00 3.00 8 50.00 78.00 32.00 B FFQ8 SZMU 120520 2.95
• Radius for programming 5.0 mm • To generate a straight surface without cusps, the width of cut must not exceed DC • For slot milling or machining with high tool
overhang, the maximum depth of cut should be reduced by 30%.
(1) Cutting diameter maximum
(2) Number of inserts
(3) Master insert identification

Spare Parts

Designation
MFQ8 D050-05-22-12 SR M4X0.7-L11.5 IP15 BLD IP15/S7 SW6-T-SH SR M10X40-1638
MFQ8 D063-06-22-12 SR M4X0.7-L11.5 IP15 BLD IP15/S7 SW6-T-SH SR M10X25 DIN912
MFQ8 D080-07-27-12 SR M4X0.7-L11.5 IP15 BLD IP15/S7 SW6-T-SH SR M12X30DIN912
MFQ8 D100-08-32-12 SR M4X0.7-L11.5 IP15 BLD IP15/M7 SW6-T-SH

68