Page 69 - Turning_catalog_INCH_2022_45_P261-508

LH CDX
PCHPR/L H
Perpendicular Holders HF HBH
Carrying Inserts with 5 Cutting OAL LF
Edges for Facing, Grooving, B Lock
Parting and Recessing
CWN-CWX
WF Right-hand shown GROOVE-TURN
Designation H B CWN (1) CWX (2) CDX (3) HF WF LF OAL LH HBH
PCHPR/L 16-24 .630 .630 .020 .126 (4) .256 .630 .059 (5) .93 4.724 .453 -
PCHPR/L 19-24 .750 .750 .020 .126 .256 .750 .060 1.10 5.000 .450 -
(5)
(4)
PCHPR/L 25.4-24 1.000 1.000 .020 .126 .256 1.000 .060 1.30 5.500 .450 -
(5)
(4)
PCHPR/L 19-34 .750 .750 .055 .157 .394 .750 .070 1.30 5.000 .590 .24
PCHPR/L 25.4-34 1.000 1.000 .055 .157 .394 1.000 .070 1.30 5.500 .590 -
(1) Minimum cutting width
(2) Maximum cutting width
(3) For specific information, refer to insert data
(4) Up to 244" width may be ordered on request
(5) Valid for inserts with W<126"
For inserts, see pages: PENTA 24-BSPT (736) • PENTA 24-ISO (716) • PENTA 24-MT (704) • PENTA 24-NPT (731) • PENTA 24-UN (723)
• PENTA 24-W (728) • PENTA 24-WT (698) • PENTA 24N-C (334) • PENTA 24N-C (full radius) (335) • PENTA 24N-J (333) • PENTA 24N-J (full radius) (334)
• PENTA 24N-PF (full radius) (336) • PENTA 24N-PF/P (335) • PENTA 24N-Z (336) • PENTA 24R-C (587) • PENTA 24R-P (590) • PENTA 24R/L-J (586)
• PENTA 24R/L-Z (589) • PENTA 34F-R/L (645) • PENTA 34N-C (339) • PENTA 34N-J (340) • PENTA 34N-PB (338) • PENTA 34R/L-C (591)
• PENTA 34R/L-J (592) • PENTA 34R/L-PB (593)

Spare Parts

Designation
PCHPL 16-24 SR 16-212-01397 T-20/5
PCHPR 16-24 SR 16-212-01397L T-20/5
PCHPL 19-24 SR 16-212-01397 T-20/5
PCHPR 19-24 SR 16-212-01397L T-20/5
PCHPL 25.4-24 SR 16-212-01397 T-20/5
PCHPR 25.4-24 SR 16-212-01397L T-20/5
PCHPR/L 19-34 SR 16-212-01397 T-20/5
PCHPR/L 25.4-34 SR 16-212-01397 T-20/5

329