Page 74 - Turning_catalog_INCH_2022_45_P261-508

GROOVE-TURN PENTA 24N-J Dimensions ±.0016 CDX .079 .079 Tough 1 Hard Recommended
.945
(full radius)
Precision Grooving Pentagonal Full
Radius Inserts for Soft Materials
CW RE

Machining Data

f groove
CW
(IPR)
RE
Designation
PENTA 24N100J050 .039 .0197 CWTOL (1) RETOL (2) CDX (3) • IC908 IC807G .0012-.0027
.0008
.138
.0020
PENTA 24N120J060 .047 .0236 .0008 .0020 .079 • .0012-.0027
PENTA 24N140J070 .055 .0276 .0008 .0020 .079 • .0020-.0031
PENTA 24N157J079 .062 .0311 .0008 .0020 .118 • • .0020-.0031
PENTA 24N200J100 .079 .0394 .0008 .0020 .118 • • .0020-.0047
PENTA 24N239J120 .094 .0472 .0008 .0020 .197 • .0024-.0063
PENTA 24N300J150 .118 .0590 .0008 .0020 .256 • • .0024-.0079
PENTA 24N318J159 .125 .0626 .0008 .0020 .256 • .0024-.0079
PENTA 24N400J200 .157 .0787 .0008 .0020 .246 • .0024-.0079
• Recessing is possible only with 094" and wider inserts • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) For grooving depth relative to part diameter, see page 336
For tools, see pages: HMSDV PEN (530) • HSTBS-PEN (530) • PCAD RE/LE-JHP (553) • PCADR/L (330) • PCADR/L-JHP (330) • PCHBR/L (332)
• PCHPR/L (329) • PCHR/L-24 (325) • PCHR/L-24-JHP (326)

CW

PENTA 24N-C RE CDX ±.0016 .945
Inserts with 5 Cutting Edges for
Parting and Grooving Bars, Hard
Materials and Tough Applications
.079
.079
Recommended
Dimensions Machining Data

IC908 f groove
Designation CW RE CWTOL (1) RETOL (2) CDX (3) (IPR)
PENTA 24N150C010 .059 .0039 .0008 .0020 .197 • .0020-.0043
PENTA 24N157C015 .062 .0059 .0008 .0020 .118 • .0020-.0047
PENTA 24N170C010 .067 .0039 .0008 .0020 .118 • .0020-.0051
PENTA 24N178C018 .070 .0071 .0008 .0020 .118 • .0020-.0055
PENTA 24N196C015 .077 .0059 .0008 .0020 .118 • .0020-.0059
PENTA 24N200C020 .079 .0079 .0008 .0020 .236 • .0020-.0063
PENTA 24N222C015 .087 .0059 .0008 .0020 .138 • .0020-.0063
PENTA 24N230C020 .091 .0079 .0008 .0020 .138 • .0024-.0067
PENTA 24N239C015 .094 .0059 .0008 .0020 .197 • .0027-.0071
PENTA 24N247C020 .097 .0079 .0008 .0020 .197 • .0031-.0071
PENTA 24N270C010 .106 .0039 .0008 .0020 .244 • .0035-.0071
PENTA 24N287C020 .113 .0079 .0008 .0020 .244 • .0039-.0071
PENTA 24N300C020 .118 .0079 .0008 .0020 .244 • .0039-.0079
PENTA 24N300C040 .118 .0157 .0008 .0020 .244 • .0039-.0079
PENTA 24N318C020 .125 .0079 .0008 .0020 .244 • .0039-.0079
PENTA 24N478C055 .188 .0216 .0008 .0020 .244 • .0039-.0098
PENTA 24N486C040 .191 .0157 .0008 .0020 .244 • .0039-.0098
PENTA 24N500C040 .197 .0157 .0008 .0020 .244 • .0039-.0098
• Recessing is possible only with 094" and wider inserts • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) For grooving and parting depths relative to part diameter, see page 336
For tools, see pages: HMSDV PEN (530) • HSTBS-PEN (530) • PCAD RE/LE-JHP (553) • PCADR/L (330) • PCADR/L-JHP (330) • PCHBR/L (332)
• PCHPR/L (329) • PCHR/L-24 (325) • PCHR/L-24-JHP (326)

334 ISCAR