Page 73 - Turning_catalog_INCH_2022_45_P261-508

Identification System for Standard Inserts
PENTA 24 N 150 J 010
Family Circular circumference of Insert lead angle (K) Cutting edge width Chipbreaker Corner radius RE (mm)x100 for neutral insert. (k=0)
name the insert N, R, L CW(mm)x100 style J, Z Or lead angle for right- or left-hand inserts. (eg. 15D=15º)

CW GROOVE-TURN
PENTA 24N-J RE CDX ±.0016 .945
Inserts with 5 Cutting Edges
for Parting and Grooving
Soft Materials, Tubes, Small
and Thin-Walled Parts BW

Recommended
Dimensions Tough 1 Hard
Machining Data

IC1010 IC1008 IC908 IC807G f groove
Designation CW RE CWTOL (1) RETOL (2) BW CDX (3) (IPR)
PENTA 24N050J000 .020 .0000 .0008 .0008 .157 .039 • .0008-.0016
PENTA 24N050J004 .020 .0016 .0008 .0008 .157 .098 • .0008-.0020
PENTA 24N080J000 .031 .0000 .0008 .0008 .157 .063 • .0008-.0020
PENTA 24N100J004 .039 .0016 .0008 .0008 .157 .138 • .0012-.0027
PENTA 24N100J006 .039 .0024 .0008 .0008 .157 .138 • • .0012-.0027
PENTA 24N104J000 .041 .0000 .0008 .0008 .157 .079 • .0008-.0027
PENTA 24N120J000 .047 .0000 .0008 .0008 .157 .079 • • .0012-.0027
PENTA 24N125J010 .049 .0039 .0008 .0008 .157 .079 • .0012-.0027
PENTA 24N140J000 .055 .0000 .0008 .0008 .157 .079 • .0012-.0031
PENTA 24N147J000 .058 .0000 .0008 .0008 .157 .098 • .0012-.0031
PENTA 24N150J010 .059 .0039 .0000 .0008 .157 .197 • • • • .0012-.0039
PENTA 24N157J015 .062 .0059 .0008 .0012 .157 .118 • • .0000-.0047
PENTA 24N170J010 .067 .0039 .0008 .0012 .157 .118 • • .0012-.0047
PENTA 24N178J018 .070 .0071 .0008 .0012 .157 .118 • • .0016-.0047
PENTA 24N185J015 .073 .0059 .0008 .0012 .157 .118 • .0016-.0047
PENTA 24N196J015 .077 .0059 .0008 .0012 .157 .118 • • .0016-.0047
PENTA 24N196J040 .077 .0157 .0008 .0012 .157 .118 • .0012-.0039
PENTA 24N200J020 .079 .0079 .0008 .0012 .157 .236 • • • • .0016-.0047
PENTA 24N222J015 .087 .0059 .0008 .0012 .157 .138 • • .0016-.0063
PENTA 24N230J020 .091 .0079 .0008 .0012 .157 .138 • • .0016-.0063
PENTA 24N239J015 .094 .0059 .0008 .0012 .157 .197 • • .0016-.0063
PENTA 24N247J020 .097 .0079 .0008 .0012 .157 .197 • • .0016-.0063
PENTA 24N270J010 .106 .0039 .0008 .0008 .157 .197 • .0016-.0063
PENTA 24N287J020 .113 .0079 .0008 .0012 .157 .256 • .0016-.0063
PENTA 24N300J000 .118 .0000 .0008 .0008 .157 .256 • .0016-.0039
PENTA 24N300J020 .118 .0079 .0008 .0012 .157 .256 • • • .0016-.0063
PENTA 24N300J040 .118 .0157 .0008 .0012 .157 .256 • • .0016-.0063
PENTA 24N315J015 .124 .0059 .0008 .0012 .157 .256 • .0016-.0063
PENTA 24N318J020 .125 .0079 .0008 .0012 .157 .256 • • .0016-.0063
PENTA 24N330J010 .130 .0039 .0008 .0012 .197 .252 • .0016-.0063
PENTA 24N348J020 .137 .0079 .0008 .0012 .197 .252 • .0016-.0071
PENTA 24N356J020 .140 .0079 .0008 .0012 .197 .252 • .0016-.0071
PENTA 24N374J020 .147 .0079 .0008 .0012 .197 .252 • .0016-.0071
PENTA 24N398J020 .157 .0079 .0008 .0012 .197 .244 • .0016-.0071
PENTA 24N400J040 .157 .0157 .0008 .0012 .197 .244 • .0016-.0071
PENTA 24N423J010 .167 .0039 .0008 .0012 .197 .244 • .0016-.0071
• Recessing is possible only with 094" and wider inserts • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) For grooving and parting depth relative to part diameter, see page 336
For tools, see pages: HMSDV PEN (530) • HSTBS-PEN (530) • PCAD RE/LE-JHP (553) • PCADR/L (330) • PCADR/L-JHP (330) • PCHBR/L (332)
• PCHPR/L (329) • PCHR/L-24 (325) • PCHR/L-24-JHP (326)

333