Page 98 - Turning_catalog_INCH_2022_45_P261-508
P. 98
GROOVE-TURN CGHR/L-12-14D CWN (1) CWX (2) OHX (3) CDX (4) .374 OHX 10.236 H CGHR WB 2.071 SR 76-4002 HW 5.0
Deep Machining Screw-Clamped
HF
Blades for Wide Grooving and
Heavy Turning Applications
OAL
CW
Designation
WB
H
HF
OAL
CGHR/L 53-12D
3.661
1.772
3.937
.472
.571
CGHR/L 53-14D
• If the diameter of the workpiece is smaller than 787", then CDX=385" • For user guide, see pages 471-488
(1) Minimum cutting width
(2) Maximum cutting width .492 .685 3.937 3.661 .437 10.236 1.772 2.071 SR M6X25 DIN912 HW 5.0
(3) Maximum overhang
(4) If workpiece diameter is smaller than 787", then CDX=386",if workpiece diameter is larger than 787", then CDX=366"
For inserts, see pages: GIMY 1260 (300) • TIGER (358)
For holders, see pages: SGTBK (673) • SGTBU/SGTBN (672)
±.004 .945 Ref.
TIGER
Utility Single-Ended Inserts 7° .232
for External Heavy Grooving
and Deep Machining CW
RE BW
Y Chipformer CW Chipformer
Recommended
Dimensions Tough 1 Hard Machining Data
IC830 IC808 IC20 f groove
Designation CW CWTOL (1) RE RETOL (2) BW INSL (IPR)
TIGER 1453-152 .572 .0031 .0598 .0020 .394 .945 • • • .0087-.0173
TIGER 1453-152-CW .572 .0031 .0598 .0020 .394 .945 • .0059-.0197
TIGER 16.63-1.52 .655 .0008 .0598 .0020 .500 .945 • .0098-.0197
TIGER 1740-200 .685 .0031 .0787 .0039 .500 .945 • .0102-.0205
• For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: CGHR/L-12-14D (358) • GHDR/L/N-12/14 (357)
THDR OAL
External Holders for Wide H
Grooving Inserts
CDX
WF B
CW
WB
Designation CW CDX (1) H WF B OAL WB
THDR 38.1-20T45 .790 1.770 1.500 1.110 1.500 7.000 .689 SR 14-519 BLD T20/M7 SW6-T
• For grooving only
(1) Cutting depth maximum
For inserts, see pages: TIGERV (359)
358 ISCAR