Page 99 - Turning_catalog_INCH_2022_45_P261-508

TIGERV
Utility Single-Ended Inserts CW
for External Deep Grooving
and Heavy Machining
RE .256
Y Chipformer CW Chipformer GROOVE-TURN

Dimensions Tough 1 Hard Recommended
Machining Data

IC830 IC808 f groove
Designation CW RE CWTOL (1) RETOL (2) IC20 (IPR)
TIGERV 1700-200-CW .669 .079 .0031 .0020 • .0079-.0236
TIGERV 2006-152 .790 .060 .0031 .0020 • • • .0118-.0236
• For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: THDR (358)

LH
PCHR/L-27-JHP-MC HH CNT PSI Max
Tools Carrying Pentagonal HF H Coolant Outlets
Wide Inserts for Specially HBH
Tailored Profiles HBL OAL
HBKW
CW B

Designation CW H HF B HBKW OAL LH HBL HBH CNT HH
PCHR/L 19-27-10-JHP-MC .394 .750 .750 .750 .2340 4.055 1.260 1.299 .512 G1/8 .685
PCHR/L 25.4-27-10-JHP-MC .394 1.000 1.000 1.000 - 4.645 1.260 1.299 .315 G1/8 .685
PCHR/L 19-27-15-JHP-MC .598 .750 .750 .750 .2340 4.055 1.260 1.299 .512 G1/8 .685
PCHR/L 25.4-27-15-JHP-MC .598 1.000 1.000 1.000 - 4.645 1.260 1.299 .315 G1/8 .685
PCHR/L 19-27-20-JHP-MC .799 .750 .750 .750 .2340 4.055 1.260 1.299 .512 G1/8 .685
PCHR/L 25.4-27-20-JHP-MC .799 1.000 1.000 1.000 - 4.645 1.260 1.299 .315 G1/8 .685
For inserts, see pages: PENTAS 27 blanks (338)
For holders, see pages: C#-ASHR/L (802) • HSK A63WH-ASHR/L-1 (804)

Spare Parts
Designation
PCHR/L-27-JHP-MC HW 4.0

PENTAS 27 blanks CDX ø1.062 BW
Blank Inserts with 5 Wide Cutting
Edges for the Production of
Special Profile Contours
CW

Dimensions

Designation CW CDX BW IC08
PENTAS 27-10FT .394 .157 .465 •
PENTAS 27-15FT .591 .157 .661 •
PENTAS 27-20FT .787 .157 .858 •
For tools, see pages: PCHR/L-27-JHP-MC (327)

359