Page 107 - Turning_catalog_INCH_2022_45_P509-690
P. 107
LH
HFHR/L-4T
Integral Toolholders for CDX HFHR/L --4T12 H H OAH
External Facing WF2 CW HBH
DAXN-DAXX
WF B
CDX
.826 OAL Right-hand shown FACE GROOVING
Designation CW CDX WF2 H B OAL WF DAXN (1) DAXX (2) LH OAH
HFHR 25.4-25-4T12 .157 .470 .24 1.000 1.000 6.000 1.020 .98 1.14 1.540 1.35 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-29-4T12 .157 .470 .24 1.000 1.000 6.000 1.020 1.14 1.34 1.540 1.39 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-34-4T20 .157 .790 .24 1.000 1.000 6.000 1.020 1.34 1.57 1.540 1.39 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-40-4T25 .157 .980 .24 1.000 1.000 6.000 1.020 1.57 1.89 1.730 1.43 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-48-4T25 .157 .980 .24 1.000 1.000 6.000 1.020 1.89 2.36 1.730 1.47 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-60-4T25 .157 .980 .24 1.000 1.000 6.000 1.020 2.36 2.95 1.730 1.47 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-75-4T25 .157 .980 .24 1.000 1.000 6.000 1.020 2.95 3.94 1.730 1.47 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-100-4T25 .157 .980 .24 1.000 1.000 6.000 1.020 3.94 5.51 1.730 1.47 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-140-4T25 .157 .980 .24 1.000 1.000 6.000 1.020 5.51 9.45 1.730 1.47 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-240-4T25 .157 .980 .24 1.000 1.000 6.000 1.020 9.45 31.50 1.730 1.47 SR M6X16 DIN912 HW 5.0
• DGN & GRIP 4 inserts can be used only with right-hand tools, HGPL 4 inserts with left-hand tools • For user guide, see pages 607-612, 663-669
(1) Minimum penetration diameter
(2) Maximum penetration diameter
For inserts, see pages: DGN-MF (537) • DGN/DGNC/DGNM-C (533) • DGN/DGNM-J/JS/JT (535) • GRIP (277) • GRIP (full radius) (278)
• GRIPA (278) • GRIPA (full radius) (279) • HFPR/L (629) • HFPR/L (full radius) (629) • HGPL (631)
Groove can be widened with no limitation toward or away
from the center with the exception of the following tools:
d
HFHR/L-#-25-4T12 HFHR/L-#-29-4T12
Limitation of widening toward
D d D d center (d) depends on the major
.98 .04 1.14 .04 diameter (D) as per chart D
≥1.02 0 ≥1.8 0
LH
HFHR/L-5T
Integral Toolholders for CDX H H OAH
External Facing HFHR/L --5T10 CW HBH
WF2
DAXN-DAXX WF B
CDX
.826 OAL Right-hand shown
Designation CW CDX H B OAL WF2 WF DAXN (1) DAXX (2) LH OAH
HFHR/L 25.4-25-5T10 .197 .390 1.000 1.000 6.000 .28 1.040 .98 1.18 1.500 1.31 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-28-5T15 .197 .670 1.000 1.000 6.000 - 1.040 1.10 1.22 1.340 1.39 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-31-5T15 .197 .670 1.000 1.000 6.000 - 1.040 1.22 1.38 1.340 1.39 SR M6X16 DIN912 HW 5.0
HFHR 25.4-35-5T20 .197 .790 1.000 1.000 6.000 - 1.040 1.38 1.57 1.540 1.43 SR M6X16 DIN912 HW 5.0
HFHR 25.4-40-5T20 .197 .790 1.000 1.000 6.000 - 1.040 1.57 1.77 1.540 1.43 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-55-5T25 .197 .980 1.000 1.000 6.000 - 1.040 2.17 2.76 1.730 1.43 SR M6X16 DIN912 HW 5.0
HFHR 25.4-45-5T25 .197 .980 1.000 1.000 6.000 - 1.040 1.77 2.17 1.730 1.43 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-70-5T32 .197 1.260 1.000 1.000 6.000 - 1.040 2.76 3.74 2.000 1.43 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4-95-5T32 .197 1.260 1.000 1.000 6.000 - 1.040 3.74 5.12 2.000 1.43 SR M6X16 DIN912 HW 5.0
• DGN & GRIP 5 inserts can be used only with right-hand tools, HGPL 5 inserts with left-hand tools • For user guide, see pages 607-612, 663-669
(1) Minimum penetration diameter
(2) Maximum penetration diameter
For inserts, see pages: DGN-W (534) • DGN/DGNC/DGNM-C (533) • DGN/DGNM-J/JS/JT (535) • GRIP (277) • GRIP (full radius) (278)
• HFPR/L (629) • HFPR/L (full radius) (629) • HGPL (631)
Groove can be widened with no limitation toward or away
from the center with the exception of the following tools:
HFHR/L-#-31-5T15 HFHR/L-#-28-5T15 HFHR/L-#-25-5T10 d
D d D d D d
1.22 .59 1.10 .51 .98 .16 Limitation of widening
1.26 .39 1.14 .31 1.02 .04 toward center (d) depends
1.30 .28 1.18 .20 ≥1.06 0 on the major diameter (D) D
1.34 .16 1.22 .12 as per chart
1.38 .08 1.29 .04
≥1.42 0 ≥1.30 0
615
