Page 34 - Turning_catalog_INCH_2022_45_P509-690
P. 34

PARTING  HGN-J                                         ±.004 RE  INSL

           Inserts for Parting and
         Grooving Soft Materials,
         Parting Tubes, Small Diameters
           and Thin-Walled Parts
                                                                 CW

                                                   Dimensions                         Tough 1   Hard  Recommended
                                                                                                     Machining Data


                                                                                      IC328  IC830  IC354  IC308  f groove
           Designation         CW         RE        CWTOL (1)   RETOL (2)   INSL                        (IPR)
           HGN 3002J            .118       .0079      .0020       .0012      .634    •   •   •   •      .0016-.0059
         •  No depth limit   •  For cutting speed recommendations and user guide, see pages 594-603
         (1)  Cutting width tolerance (+/-)
         (2)  Corner radius tolerance (+/-)
         For tools, see pages: C#-HELIR/L (271) • D/HGAD RE/LE-JHP (553) • DGAD/HGAD (531) • HELIR/L (272) • HFPAD-3 (617) • HFPAD-JHP (617)
         •  HGAIR/L-3 (624) • HGFH (274) • HGHR/L-3 (614) • HGPAD (274) • HGPAD-JHP (274)




                                                               ±.004   lNSL
         HGR/L-J/JS
         Double-Sided Inserts for Parting                           RE
         Soft Materials, Tubes, Small                                         R
         Diameters and Thin-Walled Parts                         PSIRR
                                                                  CW          L

                                                                                                     Recommended
                                                     Dimensions                         Tough 1   Hard
                                                                                                     Machining Data

                                                                                         IC328  IC830  IC354  f groove
           Designation         CW          RE          PSIRL       PSIRR       INSL                     (IPR)
           HGL 3000JS-15D  (1)   .118       .0008      15.0         -            .598   •              .0012-.0027
           HGR 3000JS-15D  (1)   .118       .0008       -           15.0         .598   •              .0012-.0027
           HGL 3002J-6D         .118        .0079       6.0         -            .618   •              .0016-.0047
           HGR 3002J-6D         .118        .0079       -           6.0          .618   •   •    •     .0016-.0047
         •  No depth limit   •  For cutting speed recommendations and user guide, see pages 594-603
         (1)  Sharp corners
         For tools, see pages: C#-HELIR/L (271) • D/HGAD RE/LE-JHP (553) • DGAD/HGAD (531) • HELIR/L (272) • HGFH (274) • HGPAD (274) • HGPAD-JHP (274)





         HGN-UT                                                ±.004
         Double-Sided Inserts for Parting
         and Grooving Low Feeds on Cr-Ni                                   RE
         Alloys and Low Carbon Steel                                         CW
                                                                       INSL

                                                                                                     Recommended
                                                     Dimensions                         Tough 1   Hard
                                                                                                     Machining Data


                                                                                          IC328  IC354  f groove
           Designation         CW          RE         CWTOL (1)   RETOL (2)     INSL                    (IPR)
           HGN 3003UT           .118        .0118       .0020       .0012        .622    •      •      .0016-.0051
         •  No depth limit   •  For cutting speed recommendations and user guide, see pages 594-603
         (1)  Cutting width tolerance (+/-)
         (2)  Corner radius tolerance (+/-)
         For tools, see pages: C#-HELIR/L (271) • D/HGAD RE/LE-JHP (553) • DGAD/HGAD (531) • HELIR/L (272) • HFPAD-3 (617) • HFPAD-JHP (617)
         •  HGAIR/L-3 (624) • HGFH (274) • HGHR/L-3 (614) • HGPAD (274) • HGPAD-JHP (274)


   542   ISCAR
   29   30   31   32   33   34   35   36   37   38   39