Page 29 - Turning_catalog_INCH_2022_45_P509-690

DGN-LF/LFT ±.004
Double-Sided Inserts for Parting
and Grooving Stainless Steel RE PARTING
CW
INSL

Dimensions Tough 1 Hard Recommended
Machining Data

IC830 IC928 IC1030 IC5400 IC1010 IC808 IC908 f groove
Designation CW CWTOL (1) RE RETOL (2) CDX (3) INSL (IPR)
DGN 2002LF .079 .0012 .0079 .0008 .709 .780 • • • • .0012-.0031
DGN 2202LF .087 .0012 .0079 .0008 .709 .780 • • • • • .0012-.0031
DGN 2502LF .098 .0012 .0079 .0008 .709 .780 • • .0012-.0031
DGN 3102LF .122 .0016 .0079 .0008 .709 .791 • • • • • • • .0016-.0039
DGN 3102LFT .122 .0016 .0079 .0008 .709 .831 • • .0016-.0047
• The LFT chipformer features basically the same design as the LF chipformer, except that it is reinforced by a T-land to improve its durability in interrupted-cut or on hard
materials applications. It can be applied at higher feeds than the LF chipformer
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: DGAD-B-D (531) • DGAM (528) • DGAMM (527) • DGAMR/L (528) • DGAQ (571) • DGAQ-JHP (571) • DGFH (275)
• DGFH-JHP (276) • DGFHL-26B-TR-D (521) • DGFHR/L (519) • DGFHR/L-B-D..(R/L) (521) • DGFHR/L-BC-JHP (519) • DGFS (520) • DGPAD-JHP (532)
• DGPAD-XL-JHP (532) • DGTR/L (525) • DGTR/L-B-D-JHP-SL (523) • DGTR/L-B-D-SH (522) • DGTR/L-B/BC-D (524) • NQCH-DGTR/L-D-SH-JHP (522)

±.004

DGN-MF
Double-Sided Inserts for Parting 7°
and Grooving Soft and Hard RE
Materials at Medium Feeds
CW
INSL

Recommended
Dimensions Tough 1 Hard
Machining Data

IC830 IC1030 IC5400 IC1010 IC808 f groove
Designation CW RE CWTOL (1) CDX (2) INSL (IPR)
DGN 2002MF .079 .0079 .0016 .709 .783 • • • • • .0016-.0047
DGN 2202MF .087 .0079 .0016 .709 .783 • • .0016-.0047
DGN 3002MF .118 .0079 .0016 .709 .791 • .0024-.0071
DGN 3102MF .122 .0079 .0016 .709 .791 • • • • • .0024-.0071
DGN 4003MF .157 .0118 .0016 - .740 • • .0032-.0079
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
(2) Cutting depth maximum
For tools, see pages: C#-HELIR/L (271) • C#-HFIR/L-MC (626) • CR HFIR-M (628) • DGAQ (571) • DGAQ-JHP (571) • DGFH (275)
• DGFH-JHP (276) • DGFHR/L-B-D..(R/L) (521) • DGFHR/L-BC-JHP (519) • DGPAD-JHP (532) • DGPAD-XL-JHP (532) • DGTR/L (525)
• DGTR/L-B-D-JHP-SL (523) • HELIR/L (272) • HFAER/L-4 (622) • HFAIR/L-4 (624) • HFAIR/L-DG (625) • HFFR/L-T (619) • HFHR/L-4T (615)
• HFIR/L-MC (627) • HFPAD-4 (618) • HFPAD-JHP (617) • HGPAD (274) • HGPAD-JHP (274) • IM-HFIR-MC (626) • NQCH-DGTR/L-D-SH-JHP (522)

537