Page 31 - Turning_catalog_INCH_2022_45_P509-690

DGN-UT/UA ±.004
Double-Sided Inserts for Parting
and Grooving Cr-Ni Alloys, RE PARTING
Low Carbon Steel and Ductile CW
Materials at Low Feeds INSL

Dimensions Tough 1 Hard Recommended
Machining Data

IC328 IC1030 IC1028 IC354 IC350 IC1010 IC308 IC908 f groove
Designation CW CWTOL (1) RE RETOL (2) CDX (3) INSL IC20 (IPR)
DGN 2202UA .087 .0012 .0079 .0008 .709 .783 • • • .0016-.0051
DGN 2202UT .087 .0012 .0079 .0008 .709 .772 • • .0012-.0043
DGN 3003UA .118 .0012 .0098 .0008 .709 .807 • • • • • • • .0016-.0059
DGN 3003UT .118 .0012 .0098 .0008 .709 .807 • • .0016-.0051
DGN 4003UA .157 .0016 .0118 .0008 - (4) .764 • • .0020-.0063
DGN 4003UT .157 .0016 .0118 .0008 - .760 • • • .0016-.0059
(4)
(4)
DGN 5003UT .197 .0016 .0118 .0008 - .748 • • • • .0020-.0071
DGN 6008UT .236 .0016 .0315 .0020 - .752 • • • • .0024-.0079
(4)
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
(4) No depth limit
For tools, see pages: C#-HELIR/L (271) • D/HGAD RE/LE-JHP (553) • DGAD-B-D (531) • DGAD/HGAD (531) • DGAM (528) • DGAMM (527)
• DGAMR/L (528) • DGAQ (571) • DGAQ-JHP (571) • DGFH (275) • DGFH-JHP (276) • DGFHL-26B-TR-D (521) • DGFHR/L (519) • DGFHR/L-B-D..(R/L) (521)
• DGFHR/L-BC-JHP (519) • DGFS (520) • DGPAD-JHP (532) • DGPAD-XL-JHP (532) • DGTR/L (525) • DGTR/L-B-D-JHP-SL (523) • DGTR/L-B-D-SH (522)
• DGTR/L-B/BC-D (524) • DGTR/L-BC-T (526) • HELIR/L (272) • HGPAD (274) • HGPAD-JHP (274) • NQCH-DGTR/L-D-SH-JHP (522)

DGN 1000
DGN-P ±.004 ±.004
Double-Sided Inserts for Parting
and Grooving Soft Materials, 7°
Thin and Miniature Parts RE INSL CW CDX
CW
RE

Dimensions Recommended Machining Data

IC508 f groove
Designation CW RE CWTOL (1) RETOL (2) INSL CDX (3) (IPR)
DGN 1000P .039 .0020 .0008 .0008 .787 .118 • .0008-.0020
DGN 1500P .059 .0020 .0008 .0008 .787 .709 • .0008-.0027
DGN 2000P .079 .0020 .0008 .0008 .787 .709 • .0008-.0031
DGN 3000P .118 .0020 .0008 .0008 .787 .709 • .0008-.0039
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: D/HGAD RE/LE-JHP (553) • DGAD-B-D (531) • DGAD/HGAD (531) • DGAM (528) • DGAMM (527) • DGAMR/L (528)
• DGAQ (571) • DGAQ-JHP (571) • DGFH (275) • DGFH-JHP (276) • DGFHL-26B-TR-D (521) • DGFHR/L (519) • DGFHR/L-B-D..(R/L) (521)
• DGFHR/L-BC-JHP (519) • DGFS (520) • DGPAD-JHP (532) • DGPAD-XL-JHP (532) • DGTR/L (525) • DGTR/L-B-D-JHP-SL (523) • DGTR/L-B-D-SH (522)
• DGTR/L-B-D-TR (526) • DGTR/L-B-T-SH (525) • DGTR/L-B/BC-D (524) • NQCH-DGTR/L-D-SH-JHP (522)

539