Page 78 - Turning_catalog_INCH_2022_45_P509-690

PARTING PENTA 24R/L-J PSIRR CDX RE ±.0016 .945
CW
PSIRL
Inserts with 5 Cutting Edges
for Parting Tubes, Small
and Thin-Walled Parts
R.H.

Dimensions L.H. Recommended
Machining Data

IC1008 f groove
Designation CW CDX (1) RE CWTOL (2) PSIRL PSIRR CUTDIA (3) (IPR)
PENTA 24L100J15D .039 .138 .0024 .0008 15.0 - .276 • .0008-.0024
PENTA 24R100J15D .039 .138 .0024 .0008 - 15.0 .276 • .0008-.0024
PENTA 24L150J06D .059 .197 .0039 .0008 6.0 - .394 • .0012-.0035
PENTA 24L150J15D .059 .197 .0024 .0008 15.0 - .394 • .0012-.0031
PENTA 24R150J06D .059 .197 .0024 .0008 - 6.0 .394 • .0012-.0035
PENTA 24R150J15D .059 .197 .0024 .0008 - 15.0 .394 • .0012-.0031
PENTA 24L200J06D .079 .236 .0039 .0008 6.0 - .472 • .0016-.0039
PENTA 24L200J15D .079 .236 .0039 .0008 15.0 - .472 • .0016-.0035
PENTA 24R200J06D .079 .236 .0039 .0008 - 6.0 .472 • .0016-.0039
PENTA 24R200J15D .079 .236 .0039 .0008 - 15.0 .472 • .0016-.0035
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting depth maximum
(2) Cutting width tolerance (+/-)
(3) For grooving and parting depths relative to part diameter, see page 589
For tools, see pages: HMSDV PEN (530) • HSTBS-PEN (530) • PCAD RE/LE-JHP (553) • PCADR/L (330) • PCADR/L-JHP (330) • PCHBR/L (332)
• PCHPR/L (329) • PCHR/L-24 (325) • PCHR/L-24-JHP (326)

CW
PENTA 24N-C RE CDX ±.0016 .945
Inserts with 5 Cutting Edges for
Parting and Grooving Bars, Hard
Materials and Tough Applications
.079
.079
Recommended
Dimensions
Machining Data

IC908 f groove
Designation CW RE CWTOL (1) RETOL (2) CDX (3) (IPR)
PENTA 24N150C010 .059 .0039 .0008 .0020 .197 • .0020-.0043
PENTA 24N157C015 .062 .0059 .0008 .0020 .118 • .0020-.0047
PENTA 24N170C010 .067 .0039 .0008 .0020 .118 • .0020-.0051
PENTA 24N178C018 .070 .0071 .0008 .0020 .118 • .0020-.0055
PENTA 24N196C015 .077 .0059 .0008 .0020 .118 • .0020-.0059
PENTA 24N200C020 .079 .0079 .0008 .0020 .236 • .0020-.0063
PENTA 24N222C015 .087 .0059 .0008 .0020 .138 • .0020-.0063
PENTA 24N230C020 .091 .0079 .0008 .0020 .138 • .0024-.0067
PENTA 24N239C015 .094 .0059 .0008 .0020 .197 • .0027-.0071
PENTA 24N247C020 .097 .0079 .0008 .0020 .197 • .0031-.0071
PENTA 24N270C010 .106 .0039 .0008 .0020 .244 • .0035-.0071
PENTA 24N287C020 .113 .0079 .0008 .0020 .244 • .0039-.0071
PENTA 24N300C020 .118 .0079 .0008 .0020 .244 • .0039-.0079
PENTA 24N300C040 .118 .0157 .0008 .0020 .244 • .0039-.0079
PENTA 24N318C020 .125 .0079 .0008 .0020 .244 • .0039-.0079
PENTA 24N478C055 .188 .0216 .0008 .0020 .244 • .0039-.0098
PENTA 24N486C040 .191 .0157 .0008 .0020 .244 • .0039-.0098
PENTA 24N500C040 .197 .0157 .0008 .0020 .244 • .0039-.0098
• Recessing is possible only with .094" and wider inserts • For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) For grooving and parting depths relative to part diameter, see page 588
For tools, see pages: HMSDV PEN (530) • HSTBS-PEN (530) • PCAD RE/LE-JHP (553) • PCADR/L (330) • PCADR/L-JHP (330) • PCHBR/L (332)
• PCHPR/L (329) • PCHR/L-24 (325) • PCHR/L-24-JHP (326)

586 ISCAR