Page 83 - Turning_catalog_INCH_2022_45_P509-690

±.0016
PENTA 34R/L-C RE CW CDX CUTDIA
Inserts with 5 Cutting Edges for PSIRR PSIRL 1.33
Parting Hard Materials, Tough PARTING
and General Applications
.169 R.H. L.H.

Dimensions Recommended Machining Data

IC908 f groove
Designation CW RE CUTDIA (1) CDX (2) PSIRL PSIRR (IPR)
PENTA 34L150C08D .059 .0027 .709 .315 8.0 - • .0012-.0031
PENTA 34R150C08D .059 .0027 .709 .315 - 8.0 • .0012-.0031
PENTA 34L200C06D .079 .0039 .709 .315 6.0 - • .0016-.0047
PENTA 34R200C06D .079 .0039 .709 .315 - 6.0 • .0016-.0047
PENTA 34L200C15D .079 .0039 .709 .315 15.0 - • .0016-.0039
PENTA 34R200C15D .079 .0039 .709 .315 - 15.0 • .0016-.0039
PENTA 34L300C06D .118 .0079 .787 .394 6.0 - • .0016-.0055
PENTA 34R300C06D .118 .0079 .787 .394 - 6.0 • .0024-.0055
PENTA 34L300C15D .118 .0079 .787 .394 15.0 - • .0016-.0039
PENTA 34R300C15D .118 .0079 .787 .394 - 15.0 • .0024-.0047
• For cutting speed recommendations and user guide, see pages 594-603
(1) For grooving and parting depths relative to part diameter, see page 593
(2) Cutting depth maximum
For tools, see pages: PCADR/L (330) • PCADR/L 34N-RE (331) • PCADR/L-JHP (330) • PCHBR/L (332) • PCHPR/L (329) • PCHR/L-34 (328)
• PCHR/L-34-JHP (328)

RE CW
PENTA 34N-J ±.0016 1.34
Inserts with 5 Cutting Edges
for Parting and Grooving Soft
Materials, Parting Tubes, Small
and Thin-Walled Parts
.169

Recommended
Dimensions
Machining Data

IC908 f groove
Designation CW RE CWTOL (1) RETOL (2) CDX (3) (IPR)
PENTA 34N150J015 .059 .0059 .0008 .0001 .335 • .0012-.0039
PENTA 34N200J020 .079 .0079 .0008 .0001 .335 • .0016-.0047
PENTA 34N200J100 .079 .0394 .0008 .0001 .335 • .0020-.0047
PENTA 34N239J015 .094 .0059 .0008 .0001 .335 • .0016-.0063
PENTA 34N239J120 .094 .0472 .0008 .0001 .335 • .0024-.0063
PENTA 34N250J020 .098 .0079 .0008 .0001 .335 • .0016-.0063
PENTA 34N270J010 .106 .0039 .0008 .0001 .394 • .0016-.0063
PENTA 34N300J000 .118 .0000 .0008 .0000 .394 • .0016-.0039
PENTA 34N300J020 .118 .0079 .0008 .0001 .394 • .0016-.0063
PENTA 34N300J040 .118 .0157 .0008 .0001 .394 • .0016-.0063
PENTA 34N300J150 .118 .0590 .0008 .0001 .394 • .0024-.0079
PENTA 34N318J020 .125 .0079 .0008 .0001 .394 • .0079-.0063
• Recessing is possible only with .094" and wider inserts • For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) For grooving and parting depths relative to part diameter, see page 590
For tools, see pages: PCADR/L (330) • PCADR/L 34N-RE (331) • PCADR/L-JHP (330) • PCHBR/L (332) • PCHPR/L (329) • PCHR/L-34 (328) • PCHR/L-34-JHP (328)

591