Page 105 - ISCAR FACE GROOVING LINES

GIMY-F ±0.1 IC8250
Utility Single-Ended Inserts IC808
for Grooving and Profiling 7° IC9085
Ductile Materials 15.3 IC806
IC804
CW BW
FACE GROOVE-TURN
RE

METRIC

Dimensions Tough 1 Hard Recommended Machining Data

ap f turn f groove

Designation CW RE CWTOL(1) RETOL(2) BW • (mm) (mm/rev) (mm/rev)
0.18-0.26 0.07-0.13
GIMY 315F 3.00 1.50 0.05 0.050 2.40 •• 0.00-1.50 0.23-0.42 0.11-0.21
GIMY 525F 0.24-0.50 0.13-0.25
GIMY 630F 5.00 2.50 0.05 0.050 3.90 0.00-2.50 0.32-0.67 0.18-0.34
GIMY 840F • • • • 0.00-3.00
6.00 3.00 0.05 0.050 5.00
8.00 4.00 0.05 0.050 5.60 •
0.00-4.00

• DMIN for internal applications =70 mm • Can cut arcs to 250° • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • CGFG 51-P8 (88)

GIMY-F ±.004
Utility Single-Ended Inserts
for Grooving and Profiling 7° .197
Ductile Materials .602

CW BW

RE

INCH

Dimensions Tough 1 Hard Recommended Machining Data

IC8250 ap f turn f groove
IC808
Designation CW RE CWTOL(1) RETOL(2) BW IC908 (inch) (IPR) (IPR)
IC806 .0071-.0102 .0028-.0051
GIMY 315F IC804 .0091-.0165 .0043-.0083
GIMY 525F .0094-.0197 .0051-.0098
GIMY 630F .118 .059 .0020 .0020 .094 • .000-.059 .0126-.0264 .0071-.0134
GIMY 840F ••
.197 .098 .0020 .0020 .154 •••• .000-.098

.236 .118 .0020 .0020 .197 .000-.118
.220 •
.315 .157 .0020 .0020 .000-.157

• DMIN for internal applications = 2.76" • Can cut arcs to 250° • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • CGFG 51-P8 (88)

103