Page 121 - ISCAR FACE GROOVING LINES

CW CW CW FACE GROOVE-TURN
H OAL
SGFFH CDX HF
Face Grooving Blades DAXN-DAXX H

WB_2 WB_2 WB_2

SGFFH..L-6 SGFFH..R-6

METRIC

Designation CW CDX DAXN(1) DAXX(2) HF H WB_2 OAL
32.0 5.2 150.00
SGFFH 35-R/L-2 2.10 20.00 35.0 46.0 0.8 32.0 5.2 150.00
SGFFH 45-R/L-2 32.0 5.2 150.00
SGFFH 60-R-2 2.10 20.00 45.0 61.0 0.8 32.0 4.0 150.00
SGFFH 80-R/L-2 32.0 4.0 150.00
SGFFH 100-R/L-2 2.10 20.00 60.0 80.0 0.8 32.0 5.2 150.00
SGFFH 75-R/L-3 32.0 5.2 150.00
SGFFH 90-R/L-3 2.10 20.00 79.0 102.0 0.8 32.0 5.2 150.00
SGFFH 120-R/L-3 32.0 5.2 150.00
SGFFH 80-R/L-4 2.10 20.00 101.0 132.0 0.0 32.0 5.2 150.00
SGFFH 150-R/L-4 32.0 5.2 150.00
SGFFH 80-R/L-5 3.00 20.00 65.0 92.0 1.0 32.0 5.2 150.00
SGFFH 150-R/L-5 32.0 8.0 150.00
SGFFH 90-R/L-6 3.00 20.00 90.0 122.0 0.2 32.0 5.2 150.00
SGFFH 150-R/L-6
3.00 25.00 120.0 160.0 0.0

4.00 30.00 80.0 155.0 2.5

4.00 30.00 150.0 500.0 2.5

5.00 32.00 80.0 162.0 0.0

5.00 35.00 150.0 600.0 0.0

6.00 32.00 90.0 150.0 0.0

6.00 35.00 148.0 700.0 0.0

• Important: Apply R.H. insert on R.H. tool and L.H. insert on L.H. tool. Neutral insert only as indicated • H dimension links blades and blocks
(1) Minimum penetration diameter
(2) Maximum penetration diameter
For inserts, see pages: GFF-N (121)
For holders, see pages: SGTBF (136) • SGTBK (135) • SGTBU/SGTBN (133) • UBHCR/L (135)

Spare Parts SET ESG 0.5
ESG 0.5
Designation
SET ESG 0.5
SGFFH 35-L-2 ESG 0.5
SGFFH 35-R-2 ESG 0.5
SGFFH 45-L-2 ESG 0.5
SGFFH 45-R-2 ESG 0.5
SGFFH 60-R-2
SGFFH 80-L-2 SET ESG 0.5
SGFFH 80-R-2 SET ESG 0.5
SGFFH 100-L-2 SET ESG 1
SGFFH 100-R-2 SET ESG 1
SGFFH 75-L-3 SET ESG 1
SGFFH 75-R-3 SET ESG 1
SGFFH 90-L-3 SET ESG 1
SGFFH 90-R-3 SET ESG 1
SGFFH 120-L-3 SET ESG 1
SGFFH 120-R-3 SET ESG 1
SGFFH 80-L-4 SET ESG 1
SGFFH 80-R-4 SET ESG 1
SGFFH 150-L-4 SET ESG 1
SGFFH 150-R-4 SET ESG 1
SGFFH 80-L-5 SET ESG 1
SGFFH 80-R-5 SET ESG 1
SGFFH 150-L-5 SET ESG 1
SGFFH 150-R-5 SET ESG 1
SGFFH 90-L-6 SET ESG 1
SGFFH 90-R-6 SET ESG 1
SGFFH 150-L-6
SGFFH 150-R-6

119