Page 125 - ISCAR FACE GROOVING LINES

PCHR/L-34 OAL FACE GROOVE-TURN
Grooving, Parting and LH
Recessing Holders Carrying
Inserts with 5 Cutting Edges HF CDX H
HBH B

WF

CWN-CWX Right-hand shown

METRIC

Designation H HF B CWN(2) CWX(3) WF CDX(4) OAL LH HBH
16.0 9.0 SR 16-212-01397
PCHR/L 16-34 16.0 20.0 16.0 1.50 4.00 14.20 10.00 120.00 31.0 6.0 SR 16-212-01397
PCHR/L 20-34 20.0 25.0 - SR 16-212-01397
25.0 25.0 20.0 1.50 4.00 18.20 10.00 120.00 31.0 - SR PCHR-8-06642
PCHR/L 25-34 25.0 32.0 - SR 16-212-01397
PCHR/L 25-34-8 (1) 32.0 25.0 1.50 4.00 23.20 10.00 135.00 31.0
PCHR/L 32-34
25.0 3.19 8.20 22.50 10.00 135.00 31.0 T-15/5

32.0 1.50 4.00 30.10 10.00 135.00 31.0

(1) Used with special inserts only
(2) Minimum cutting width
(3) Maximum cutting width
(4) For specific information, refer to insert data
For inserts, see pages: PENTA 34F-R/L (122)

PCHR/L-34 OAL
Grooving, Parting and LH
Recessing Holders Carrying
Inserts with 5 Cutting Edges HF CDX H
HBH
B
WF
OAL
CWN-CWX 4.724 Right-hand shown
5.000
INCH 5.500

Designation H HF B CWN(1) CWX(2) WF CDX(3) LH HBH
.630 .630 .630 1.220 .35
PCHR/L 16-34 .750 .750 .750 .059 .157 .559 .394 1.200 .24 SR 16-212-01397
PCHR/L 19-34 1.000 1.000 1.000 1.200 - SR 16-212-01397
PCHR/L 25.4-34 .059 .157 .680 .394 SR 16-212-01397

.059 .157 .930 .394

(1) Minimum cutting width
(2) Maximum cutting width
(3) For specific information, refer to insert data
For inserts, see pages: PENTA 34F-R/L (122)

123