Page 124 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN PENTA-CUT

±0.04 34
CDX
PENTA 34F-R/L DAXN DAXN
Pentagonal Inserts for Face CDX
Grooving and Recessing
DAXN RE
RL
CW

METRIC Recommended
Dimensions Machining Data

Designation CW RE RETOL(1) CDX DAXN(2) IC908 f face-groove
(mm/rev)
PENTA 34F239-0.15-22R/L 2.39 0.15 0.020 5.00 22.0
5.00 22.0 • 0.08-0.12
PENTA 34F247-0.20-22R/L 2.47 0.20 0.020 5.00 22.0 • 0.08-0.12
5.00 22.0 • 0.08-0.15
PENTA 34F300-0.40-22R/L 3.00 0.40 0.020 • 0.08-0.15

PENTA 34F400-0.40-22R/L 4.00 0.40 0.020

• For cutting speed recommendations, see pages 162-164
(1) Corner radius tolerance (+/-)
(2) Minimum axial grooving diameter
For tools, see pages: • PCHBR/L (125) • PCHPR/L (127) • PCHR/L-34 (123) • PCHR/L-34-JHP (124)

PENTA 34F-R/L ±.0016 1.34
Pentagonal Inserts for Face CDX
Grooving and Recessing DAXN DAXN
CDX
RL
DAXN RE
Recommended
CW Machining Data

INCH
Dimensions

Designation CW RE RETOL(1) CDX DAXN(2) IC908 f face-groove
(IPR)
PENTA 34F239-0.15-22R/L .094 .0059 .0008 .197 .87
.197 .87 • .0031-.0047
PENTA 34F247-0.20-22R/L .097 .0079 .0008 .197 .87 • .0031-.0047
.197 .87 • .0031-.0059
PENTA 34F300-0.40-22R/L .118 .0157 .0008 • .0031-.0059

PENTA 34F400-0.40-22R/L .157 .0157 .0008

• For cutting speed recommendations, see pages 162-164
(1) Corner radius tolerance (+/-)
(2) Minimum axial grooving diameter
For tools, see pages: • PCHBR/L (125) • PCHPR/L (127) • PCHR/L-34 (123) • PCHR/L-34-JHP (124)

122 ISCAR