Page 145 - ISCAR FACE GROOVING LINES
P. 145
C#-GHAPR/L-8 CDX FACE GROOVE-TURN
Perpendicular Holders with
CAMFIX Exchangeable DAXN-DAXX WF 25.5 DCONMS
Shanks for Grooving, Turning CW 26 LF Right-hand shown
and Facing Adapters • CDX - See specific adapter dimensions
Designation DCONMS LF ME TR IC DAXX(2) CDX(3) CP(4) CDI(5)
C5 GHAPR/L-8 50.00 64.00 WF CW DAXN(1) 510.0 25.00 100 1
C6 GHAPR/L-8 63.00 75.00 26.00 8.00 510.0 25.00 100 1
33.00 8.00 80.0
80.0
• For user guide and accessories see pages 137, 161-173
(1) Minimum axial grooving diameter
(2) Maximum axial grooving diameter
(3) Cutting depth maximum
(4) Coolant pressure (Bar)
(5) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: • GAFG-R/L-8 (87)
Spare Parts SR 14-519 T-20/5 SR M6X25 DIN912 HW 5.0 EZ 125
SR 14-519 T-20/5 SR M6X25 DIN912 HW 5.0
Designation
C5 GHAPR/L-8
C6 GHAPR/L-8
C#-GHAPR/L-8 CDX
Perpendicular Holders with
CAMFIX Exchangeable DAXN-DAXX WF 1.00 DCONMS
Shanks for Grooving, Turning CW 1.02 LF
and Facing Adapters Right-hand shown
• CDX - See specific adapter dimensions
Designation DCONMS LF I NC H DAXX(2) CDX(3) CP(4) CDI(5)
WF CW DAXN(1) 20.08 .984 1450 1
C5 GHAPR/L-8 1.968 2.520 1.024 .315 3.15 20.08 .984 1450 1
C6 GHAPR/L-8 2.480 2.953 1.299 .315 3.15
• For user guide and accessories see pages 137, 161-173
(1) Minimum axial grooving diameter
(2) Maximum axial grooving diameter
(3) Cutting depth maximum
(4) Coolant pressure (PSI)
(5) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: • GAFG-R/L-8 (87)
Spare Parts SR 14-519 T-20/5 SR M6X25 DIN912 HW 5.0 EZ 125
SR 14-519 T-20/5 SR M6X25 DIN912 HW 5.0
Designation
C5 GHAPR/L-8
C6 GHAPR/L-8
143
