Page 150 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN 10°

HSK A63WH-MAHUR/L DCONMS
Holders with HSK-T Shanks
for 10° Mounting on Mill-Turn LPR L5
Machines for Parting, Grooving, 10°
Turning and Facing Adapters
WF L1
CDX CDX = See specific adapter dimensions • Right-handshown
f1

METRIC

Designation DCONMS f1 WF LPR L1 L5 CP(1) CDI(2)
1
HSK A63WH MAHUR/L 10 63.00 113.1 29.00 130.00 49.4 30.00 100
CDI(2)
INCH 1

Designation DCONMS f1 WF LPR L1 L5 CP(1)

HSK A63WH MAHUR/L 10 2.480 4.453 1.142 5.118 1.945 1.181 1450

• A cooling tube must be used with all coolant through HSK spindles (should be ordered separately) • Complies with ICTM standard (ISO 12164-3)
(1) Coolant pressure (Bar)
(2) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: • HFPAD-3 (49) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50)

Spare Parts

Designation

HSK A63WH MAHUR/L 10 SR M5-04451 T-20/5 SR 14-519(a) SR M6X20-XT(b) HW 5.0 SR M6X6DIN551 14H/22H(c) EZ 125

(a) For DGAD, HGAD and PCADR/L adapters; supplied in the attached plastic bag

(b) For CGPAD, HGPAD, TGPAD and HFPAD adapters; supplied with the tools

(c) Used to prevent chips from entering the upper locking screw hole when it is not used for the adaptation; supplied in the attached plastic bag

HSK A-WH-TBK-R/L H DCONMS
Blocks with HSK Exchangeable
Tapered Shanks for Parting WF
and Grooving Blades OHX

LPR L5 OHX = See specific blade dimensions • Right-hand shown

METRIC

Designation DCONMS LPR L5 WF H(1) CP(2) CDI(3)
30.00 32.0 32.0 100 1
HSK A63WH TBK 32R/L 63.00 138.00 BK 32-9 WEDG SR M6X16 DIN912 HW 5.0 EZ 125
INC H

Designation DCONMS LPR L5 WF H(1) CP(2) CDI(3)

HSK A63WH TBK 32R/L 2.480 5.433 1.181 1.260 1.260 1450 1 BK 32-9 WEDG SR M6X16 DIN912 HW 5.0 EZ 125

• Complies with ICTM standard (ISO 12164-3) • Not suitable for ATC for some Multi-Tasking Machine models, please consult your MTB
• A cooling tube must be used with all coolant through HSK spindles (should be ordered separately)
(1) Blade size H has to fit this dimension
(2) Coolant pressure (Bar)
(3) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: • HFFH (37) • PCHBR/L (125) • TNFFH-IQ (109)

148 ISCAR