Page 149 - ISCAR FACE GROOVING LINES

HSK A63WH-MAHDR-45 DCONMS 45° 45º FACE GROOVE-TURN
Holders with HSK Tapered
Shanks for CDX LPR L5
MODULAR-GRIP, Parting,
Grooving and Facing Adapters BD 45°LF CDX = See specific adapter dimensions • Right-handshown
L1

METRIC

Designation DCONMS LPR L1 L5 LF BD CP(1) CDI(2)
1
HSK A63WH MAHDR 45 63.00 130.00 91.9 30.00 89.0 75.00 100
CDI(2)
INCH 1

Designation DCONMS LPR L1 L5 LF BD CP(1)

HSK A63WH MAHDR 45 2.480 5.118 3.618 1.181 3.504 2.953 1450

• A cooling tube must be used with all coolant through HSK spindles (should be ordered separately) • Complies with ICTM standard (ISO 12164-3)
(1) Coolant pressure (Bar)
(2) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: • HFPAD-3 (49) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50)

Spare Parts

Designation

HSK A63WH MAHDR 45 SR M5-04451 T-20/5 SR 14-519(a) SR M6X20-XT HW 5.0 SR M6X6DIN551 14H/22H(b) SATZ-M8X1-M3

(a) For DGAD, HGAD and PCADR/L adapters; supplied in the attached plastic bag

(b) Used to prevent chips from entering the upper locking screw hole when it is not used for the adaptation; supplied in the attached plastic bag

HSK A63WH-MAHDOR DCONMS
Holders with HSK Exchangeable
Shanks for Parting, Grooving, WF
Turning and Facing Adapters CDX

L5 CDX = See specific adapter dimensions • Right-hand shown
LPR
C
METRI

Designation DCONMS WF LPR L5 CDI(1)

HSK A63WH MAHDOR 63.00 29.0 130.00 30.00 1 SR M5-04451 T-20/5 SR 14-519(a) SR M6X20-XT(b) HW 5.0 SR M6X6DIN551 14H/22H(c) EZ 125
C H
IN

Designation DCONMS WF LPR L5 CDI(1)

HSK A63WH MAHDOR 2.480 1.142 5.118 1.181 1 SR M5-04451 T-20/5 SR 14-519(a) SR M6X20-XT(b) HW 5.0 SR M6X6DIN551 14H/22H(c) EZ 125

• A cooling tube must be used with all coolant through HSK spindles (should be ordered separately) • Complies with ICTM standard (ISO 12164-3)
(1) 1 - Hole for data chip, 0 - Without hole for data chip
(a) For DGAD, HGAD and PCADR/L adapters; supplied in the attached plastic bag
(b) For CGPAD, HGPAD, TGPAD and HFPAD adapters; supplied with the tools
(c) Used to prevent chips from entering the upper locking screw hole when it is not used for the adaptation; supplied in the attached plastic bag
For tools, see pages: • HFPAD-3 (49) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50)

147