Page 147 - ISCAR FACE GROOVING LINES
P. 147
C#-HFIR/L-MC DCONMS FACE GROOVE-TURN
Boring Bars for Internal Grooving
and Turning with CAMFIX LF
Exchangeable Shanks WF 5.3 BDRED
CWN-CWX LDRED Right-hand shown
METRIC
Designation CWN(1) CWX(2) DCONMS WF LDRED LF BDRED CDI(3)
C4 HFIR/L-MC 3.00 6.00 40.00 11.30 52.0 80.0 25.00 1 SR M5X16 DIN912 HW 4.0 EZ 83
C5 HFIR-MC 1 SR M5X16 DIN912 HW 4.0 EZ 83
3.00 6.00 50.00 11.30 52.0 80.0 25.00
• DGN & GRIP 4.. - 6.. inserts can be used only with right-hand tools, HGPL 4.. - 6.. inserts with left-hand tools • After initial groove, no limitation to widening groove
outward or toward center
• For user guide, see pages 137, 161-173
(1) Minimum cutting width
(2) Maximum cutting width
(3) 1 - Hole for data chip, 0 - Without hole for data chip
For inserts, see pages: DGN-MF (80) • HFPR/L (68) • HFPR/L (full radius) (69) • GRIP (70) • GRIP (full radius) (72) • DGN/DGNC/DGNM-C (79)
• DGN/DGNM-J/JS/JT (82) • DGN-W (81) • HGPL (75)
C#-HFIR/L-MC DCONMS
Boring Bars for Internal Grooving
and Turning with CAMFIX LF
Exchangeable Shanks WF .21 BDRED
CWN-CWX LDRED Right-hand shown
INCH
Designation CWN(1) CWX(2) DCONMS WF LDRED LF BDRED CDI(3)
C4 HFIR/L-MC
C5 HFIR-MC .118 .236 1.575 .445 2.05 3.15 .984 1 SR M5X16 DIN912 HW 4.0 EZ 83
EZ 83
.118 .236 1.968 .445 2.05 3.15 .984 1 SR M5X16 DIN912 HW 4.0
• DGN & GRIP 4.. - 6.. inserts can be used only with right-hand tools, HGPL 4.. - 6.. inserts with left-hand tools • After initial groove, no limitation to widening groove
outward or toward center
• For user guide, see pages 137, 161-173
(1) Minimum cutting width
(2) Maximum cutting width
(3) 1 - Hole for data chip, 0 - Without hole for data chip
For inserts, see pages: DGN-MF (80) • HFPR/L (68) • HFPR/L (full radius) (69) • GRIP (70) • GRIP (full radius) (72) • DGN/DGNC/DGNM-C (79)
• DGN/DGNM-J/JS/JT (82) • DGN-W (81) • HGPL (75)
145
