Page 40 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN HFFA DAXN-DAXX WF
Reinforced Face Grooving Blades
WF HF H
CW OAL 9.50
9.50 WB_2
CDX 9.50 Right-hand shown
9.50 HF
METR IC 9.50 24.8
H 9.50 24.8
Designation CW DAXN(1) DAXX(2) CDX 32.0 9.50 24.8 OAL WB_2
32.0 24.8 102.00 21.0
HFFA 27R/L-2 2.00 27.0 29.0 14.00 32.0 WF 24.8 102.00 18.5
HFFA 29R/L-2 32.0 .374 24.8 102.00 17.5
HFFA 33R/L-2 2.00 29.0 33.0 14.00 32.0 .374 24.8 102.00 13.5
HFFA 38R/L-2 32.0 .374 102.00 13.5
HFFA 46R/L-2 2.00 33.0 38.0 14.00 32.0 .374 HF 102.00 14.0
HFFA 60R/L-2 .374 .976 102.00 16.1
HFFA 80R/L-2 2.00 38.0 46.0 14.00 H .374 .976
H .374 .976 OAL WB_2
2.00 46.0 60.0 14.00 .976 4.016 .827
1.260 .976 4.016 .728
2.00 60.0 80.0 14.00 1.260 .976 4.016 .689
1.260 .976 4.016 .531
2.00 80.0 105.0 14.00 1.260 4.016 .531
1.260 4.016 .551
IN C 1.260 4.016 .634
CDX 1.260
Designation CW DAXN(1) DAXX(2) .551
.551
HFFA 27R/L-2 .079 1.06 1.14 .551
HFFA 29R/L-2 .551
HFFA 33R/L-2 .079 1.14 1.30 .551
HFFA 38R/L-2 .551
HFFA 46R/L-2 .079 1.30 1.50 .551
HFFA 60R/L-2
HFFA 80R/L-2 .079 1.50 1.81

.079 1.81 2.36

.079 2.36 3.15

.079 3.15 4.13

• For user guide, see pages 161-173
(1) Minimum penetration diameter
(2) Maximum penetration diameter
For inserts, see pages: HFPN (67)
For holders, see pages: SGTBF (136) • SGTBU/SGTBN (133) • UBHCR/L (135)

Spare Parts

Designation EDG 33B*
HFFA

* Optional, should be ordered separately

38 ISCAR