Page 45 - ISCAR FACE GROOVING LINES
P. 45
LH FACE GROOVE-TURN
HFHR/L-5T CDX HF H OAH
Integral Toolholders for DAXN-DAXX CW B
External Facing HFHR/L --5T10 HBH
WF OAL
WF2
CDX
Right-hand shown
METRIC
Designation CW CDX H HF B OAL WF2 WF DAXN(1) DAXX(2) LH OAH HBH
HFHR/L 20-25-5T10 5.00 10.00 20.0 20.0 20.0 140.00 7.1 21.00 25.0 30.0 38.0 28.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 25-25-5T10 5.00 10.00 25.0 25.0 25.0 150.00 7.1 26.00 25.0 30.0 38.0 33.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 25-110-5T14 5.00 14.00 25.0 25.0 25.0 150.00 - 23.50 110.0 200.0 32.5 33.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 25-52-5T14 5.00 14.00 25.0 25.0 25.0 150.00 - 23.50 52.0 75.0 32.5 33.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 25-75-5T14 5.00 14.00 25.0 25.0 25.0 150.00 - 23.50 75.0 110.0 32.5 33.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 20-28-5T15 5.00 17.00 20.0 20.0 20.0 140.00 - 21.00 28.0 31.0 34.0 30.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 20-31-5T15 5.00 17.00 20.0 20.0 20.0 140.00 - 21.00 31.0 35.0 34.0 30.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 25-28-5T15 5.00 17.00 25.0 25.0 25.0 150.00 - 26.00 28.0 31.0 34.0 35.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 25-31-5T15 5.00 17.00 25.0 25.0 25.0 150.00 - 26.00 31.0 35.0 34.0 35.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 20-35-5T20 5.00 20.00 20.0 20.0 20.0 140.00 - 21.00 35.0 40.0 39.0 31.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 20-40-5T20 5.00 20.00 20.0 20.0 20.0 140.00 - 21.00 40.0 45.0 39.0 31.0 - SR M6X16 DIN912 HW 5.0
HFHL 25-200-5T20 5.00 20.00 25.0 25.0 25.0 150.00 - 23.50 200.0 800.0 32.5 33.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 25-35-5T20 5.00 20.00 25.0 25.0 25.0 150.00 - 26.00 35.0 40.0 39.0 36.0 - SR M6X16 DIN912 HW 5.0
HFHL 25-40-5T20 5.00 20.00 25.0 25.0 25.0 140.00 - 26.00 40.0 45.0 39.0 36.0 - SR M6X16 DIN912 HW 5.0
HFHR 25-200-5T20 5.00 20.00 25.0 25.0 25.0 150.00 - 26.00 200.0 800.0 32.5 33.0 - SR M6X16 DIN912 HW 5.0
HFHR 25-40-5T20 5.00 20.00 25.0 25.0 25.0 150.00 - 26.00 40.0 45.0 39.0 36.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 20-45-5T25 5.00 25.00 20.0 20.0 20.0 140.00 - 21.00 45.0 55.0 44.0 32.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 20-55-5T25 5.00 25.00 20.0 20.0 20.0 140.00 - 21.00 55.0 70.0 44.0 35.0 3.0 SR M6X16 DIN912 HW 5.0
HFHR/L 25-45-5T25 5.00 25.00 25.0 25.0 25.0 150.00 - 26.00 45.0 55.0 44.0 37.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 25-55-5T25 5.00 25.00 25.0 25.0 25.0 150.00 - 26.00 55.0 70.0 44.0 37.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 20-70-5T28 5.00 28.00 20.0 20.0 20.0 140.00 - 21.00 70.0 95.0 47.0 35.0 3.0 SR M6X16 DIN912 HW 5.0
HFHR/L 25-130-5T32 5.00 32.00 25.0 25.0 25.0 150.00 - 26.00 130.0 180.0 51.0 37.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 25-180-5T32 5.00 32.00 25.0 25.0 25.0 150.00 - 26.00 180.0 800.0 51.0 37.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 25-70-5T32 5.00 32.00 25.0 25.0 25.0 150.00 - 26.00 70.0 95.0 51.0 37.0 - SR M6X16 DIN912 HW 5.0
HFHR/L 25-95-5T32 5.00 32.00 25.0 25.0 25.0 150.00 - 26.00 95.0 130.0 51.0 37.0 - SR M6X16 DIN912 HW 5.0
• DGN & GRIP 5.. inserts can be used only with right-hand tools, HGPL 5.. inserts with left-hand tools • For user guide, see pages 161-173
(1) Minimum penetration diameter
(2) Maximum penetration diameter
For inserts, see pages: GRIPA (73) • GRIPA (full radius) (74) • HFPR/L (68) • HFPR/L (full radius) (69) • GRIP (70) • GRIP (full radius) (72)
• DGN/DGNC/DGNM-C (79) • DGN/DGNM-J/JS/JT (82) • DGN-W (81) • HGPL (75)
Groove can be widened with no limitation toward or away
from the center except for the following tools:
HFHR/L- o -31-5T15 HFHR/L-o-25-5T10 HFHR/L- o -28-5T15 d
D
Dd Dd Dd Limitation of widening
31 15 25 4 28 13 toward center (d)
32 10 26 1 29 8 depends on the major
33 7 ≥27 0 30 5 diameter (D) as per
34 4 31 3 chart
35 2 32 1
≥36 0 ≥33 0
43
