Page 91 - ISCAR FACE GROOVING LINES
P. 91
GIFG-E (W=8) CDX ±0.1 30 Ref. 6.4 IC635
Inserts for Deep Face DAXN BW IC20
Grooving and Turning RE
CW FACE GROOVE-TURN
METRIC Tough 1 Hard Recommended
Dimensions Machining Data
f face-groove
Designation CW RE CWTOL(1) RETOL(2) DAXN(3) CDX(4) BW (mm/rev)
50.0 25.00 6.00 • •
GIFG 8.00E-0.80 8.00 0.80 0.02 0.050 50.0 25.00 6.00 • 0.15-0.25
GIFG 8.00E-1.20 8.00 1.20 0.02 0.050
0.15-0.25
• For cutting speed recommendations, see pages 162-164
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Minimum axial grooving diameter
(4) Cutting depth maximum
For tools, see pages: GAFG-R/L-8 (87) • GHFG-R/L-8 (83) • GHFGR/L-8 (84)
GIFG-E (W=.315) CDX ±.004 1.18 Ref. .252
Inserts for Deep Face DAXN BW
Grooving and Turning RE
CW
INC H
Dimensions
Tough 1 Hard Recommended
Machining Data
IC635 f face-groove
IC20
Designation CW RE CWTOL(1) RETOL(2) DAXN(3) CDX(4) BW (IPR)
1.97 .984 .236 • • .0059-.0098
GIFG 8.00E-0.80 .315 .031 .0008 .0020 1.97 .984 .236 •
GIFG 8.00E-1.20 .315 .047 .0008 .0020 .0059-.0098
• For cutting speed recommendations, see pages 162-164
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Minimum axial grooving diameter
(4) Cutting depth maximum
For tools, see pages: GAFG-R/L-8 (87) • GHFG-R/L-8 (83) • GHFGR/L-8 (84)
89
