Page 93 - ISCAR FACE GROOVING LINES
P. 93
GIF (long pocket) ±0.025 30 Ref. IC20
Precision Double-Ended 7˚ IC806
Inserts for Grooving 6.4
FACE GROOVE-TURN
CW BW
RE
METRIC Tough 1 Hard Recommended
Dimensions Machining Data
f groove f face-groove
Designation CW RE CWTOL(1) RETOL(2) BW CDX(3) • • (mm/rev) (mm/rev)
GIF 8.00-0.40
GIF 8.00-0.80 8.00 0.40 0.02 0.030 6.00 27.00 • • 0.18-0.31 0.14-0.23
8.00 0.80 0.02 0.050 6.00 27.00 0.18-0.34 0.14-0.25
• DMIN for internal machining = 65 mm • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: • GAFG-R/L-8 (87) • GHFG-R/L-8 (83) • GHFGR/L-8 (84)
GIF (long pocket) ±.001 1.18 Ref.
Precision Double-Ended
Inserts for Grooving 7˚ .252
CW BW Tough 1 Hard
RE
INCH Recommended
Dimensions Machining Data
IC20 f groove f face-groove
IC806
Designation CW RE CWTOL(1) RETOL(2) BW CDX(3) (IPR) (IPR)
GIF 8.00-0.40 1.063 • • .0071-.0122 .0055-.0091
GIF 8.00-0.80 .315 .0157 .0008 .0012 .236 1.063 • • .0071-.0134 .0055-.0098
.315 .0315 .0008 .0020 .236
• DMIN for internal machining = 2.56" • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: • GAFG-R/L-8 (87) • GHFG-R/L-8 (83) • GHFGR/L-8 (84)
91
