Page 89 - ISCAR FACE GROOVING LINES

GHAPR/L-8 HF OAL H FACE GROOVE-TURN
External Holders for Grooving LH HBH B
and Turning Perpendicularly
Oriented Adapters CDX

GAFG…R-8 GADL 8 GHAPR Right-hand shown

METRIC

Designation H HF B OAL LH HBH TGA(1) CDX(2) FG(3)
GHAPR/L 32-8
32.0 32.0 32.0 155.00 30.0 7.0 GADR/L 8 25.50 GAFG...R/L-8 SR 14-519 T-20/5 SR M6X25 DIN912 HW 5.0

INCH

Designation H HF B OAL LH HBH TGA(1) CDX(2) FG(3)
GAFG...R/L-8
GHAPR/L 31.7-8 1.250 1.250 1.250 6.100 1.180 .29 GADR/L 8 1.000 SR 14-519 T-20/5 SR M6X25 DIN912 HW 5.0

• Adapters GADR/L-8 for turning and grooving, GAFG-R/L-8 for face-grooving (to be ordered separately)
(1) Adapter for Turning & Grooving
(2) See specific adapter dimensions
(3) Adapter for Face Grooving
For tools, see pages: • GAFG-R/L-8 (87)

OAL

GAFG-R/L-8 CDX
Adapters for Face Machining
OAH HF

DAXN-DAXX GAFG-...L8
WF CDX For face grooving

CW Left-hand shown

METRIC

Designation CW DAXN(1) DAXX(2) CDX(3) WF HF OAH OAL
63.50
GAFG 80R/L-8 8.00 80.0 115.0 23.00 9.00 32.0 42.0 63.50
GAFG 105R/L-8 63.50
GAFG 155R/L-8 8.00 105.0 160.0 25.00 9.00 32.0 42.0
OAL
8.00 155.0 510.0 25.00 9.00 32.0 42.0 2.500
2.500
INCH 2.500

Designation CW DAXN(1) DAXX(2) CDX(3) WF HF OAH
1.260 1.654
GAFG 80R/L-8 .315 3.15 4.53 .906 .354 1.260 1.654
GAFG 105R/L-8 1.260 1.654
GAFG 155R/L-8 .315 4.13 6.30 .984 .354

.315 6.10 20.08 .984 .354

• No limitation for widening the groove either way after initial grooving • For user guide, see pages 161-173
(1) Minimum penetration diameter
(2) Maximum penetration diameter
(3) For GIFG-8 & GDMY-8 CDX=25 mm for DAX range
For inserts, see pages: GDMA (94) • GDMF (100) • GDMM-CC (108) • GDMN (98) • GDMU (99) • GDMY (95) • GDMY (full radius) (96) • GDMY-F (97)
• GIA-K (long pocket) (93) • GIF (long pocket) (91) • GIF-E (W=8,10 full radius) (92) • GIF-E (W=8,10) (90) • GIFG-E (W=8) (89) • GIPA/GIDA 8 (full radius) (105)
For holders, see pages: C#-GHAD-8 (142) • C#-GHAPR/L-8 (143) • GHAPR/L-8 (87) • GHAR/L-8 (86) • IM-GHAD-8 (151)

87