Page 94 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN GIF-E (W=8,10 full radius) ±0.025 30 Ref.
Precision Double-Ended
Full Radius Inserts for 7° 6.4
Profiling and Grooving
CW BW
RE

ME TRIC Recommended Machining Data
Dimensions Tough 1 Hard

Designation CW RE CWTOL(1) RETOL(2) BW IC830 ap f turn f groove
IC8250
(mm) (mm/rev) (mm/rev)
GIF 8.00E-4.00 8.00 4.00 0.02 0.050 6.00 • 0.00-4.00 0.32-0.67 0.18-0.34
GIF 10.00E-5.00 10.00 5.00 0.02 0.050 8.00 • • 0.00-5.00 0.35-0.78 0.22-0.40

• DMIN for internal machining = 65 mm • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • GAFG-R/L-8 (87) • GHFG-R/L-8 (83) • GHFGR/L-8 (84)

GIF-E ±.001 1.18 Ref.
(W=.315,.394 full radius)
Precision Double-Ended 7° .252
Full Radius Inserts for
Profiling and Grooving CW BW
RE

INCH

Dimensions Tough 1 Hard Recommended Machining Data

IC830 ap f turn f groove
IC8250
Designation CW RE CWTOL(1) RETOL(2) BW (inch) (IPR) (IPR)

GIF 8.00E-4.00 .315 .157 .0008 .0020 .236 • .000-.157 .0126-.0264 .0071-.0134

GIF 10.00E-5.00 .394 .197 .0008 .0020 .315 • • .000-.197 .0138-.0307 .0087-.0157

• DMIN for internal machining = 2.56" • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • GAFG-R/L-8 (87) • GHFG-R/L-8 (83) • GHFGR/L-8 (84)

92 ISCAR